info@kandbscreeding.co.uk

Latex Screed · Wiltshire

Latex Screed in Devizes

We lay latex screed in Devizes homes where a thin, flexible smoothing coat is needed between an awkward base and a new floor covering. It is a two part compound, spread a few millimetres thick over firmly stuck tiles, plywood overboarding or uneven concrete, and it gives sheet vinyl, LVT, lino or carpet a smooth face. Older Devizes rooms can combine several of these bases in one floor, and in the listed centre any work starts with what the building allows.

Latex screed for Devizes kitchen and bathroom refits

Homes built between 1973 and 1999 account for 24% of Devizes, and kitchens and bathrooms in houses of every age eventually reach the point where the old floor comes up. Underneath, the base is often a mix: old ceramic tiles under a vinyl, plywood laid over boards in a bathroom, a concrete screed scarred with adhesive where units once stood. A new sheet vinyl, LVT, rubber or safety floor cannot hide any of that, and even carpet shows a ridge in time.

Latex screed bridges those surfaces with one smooth skin. Its two components, a cement based powder and a latex liquid that takes the place of water, combine into a compound that holds on to dense tiles, tolerates slight movement in plywood and goes down only a few millimetres deep.

Each base needs its own preparation. Tiles must be firmly stuck, so we sound the whole floor and lift any that are hollow, then clean and key glazed faces. Timber boards are never latexed directly; flooring grade plywood is screwed over them first, with fixings close together, and the compound is spread on that. Old adhesive can stay if it is sound and thin, under a primer made for it. A calcium sulphate screed always has its laitance sanded off and is primed before latex goes on.

The service covers the whole town, including Cuckoo's Corner, Northbrook and Townsend. For thicker levelling over a sound screed, see levelling compound for Devizes floors.

Old Devizes floors where latex is the wrong answer

Latex smooths a sound floor. It does not make an unsound one sound, and several kinds of floor in Devizes need something else first.

Floors in the Georgian and Victorian houses of the listed centre are often suspended timber, or solid with no membrane beneath. A solid floor without a membrane can draw moisture up, and a cement based compound sealed under vinyl is likely to soften or blister as a result. We take a damp reading before quoting, and if the floor is wet the cause needs dealing with, with the listing in mind, before any smoothing coat. Old suspended floors that bounce need their timbers and fixings checked and the floor overboarded, otherwise latex cracks along every board.

Level is the other limit. Latex is meant for a few millimetres. A room that falls away by much more, or concrete that is cracked, hollow or breaking up, needs a repair or a new screed laid first. Our concrete floor repair service covers broken slabs, and a full rebuild in a small room is usually a hand-laid sand and cement floor in Devizes.

Melksham, about 6.3 miles away, has its own page on latex screed in Melksham.

How we price latex screed in Devizes

A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.

Who lays your latex screed in Devizes

Smooth liquid screed finish in a narrow room
Smooth liquid screed finish in a narrow room.

K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.

See what customers say in our Google reviews and on our testimonials page.

Latex Screed from Slough to Devizes

Devizes is about 59.6 miles west-south-west of our Slough base as the crow flies, with postcodes including SN10. The nearest towns to it are Calne (6 miles), Melksham (6.3 miles), Chippenham (9 miles) and Trowbridge (9.5 miles).

More on latex screed, part of our screeding services.

FAQs

Latex Screed in Devizes: your questions

Can latex screed go over a plywood floor?

Yes, and plywood is one of its main uses. The plywood must be flooring grade, screwed down closely to the boards or joists beneath, and primed before the latex is spread. In a Devizes bathroom or kitchen, that hides the board joints that would otherwise print through vinyl or LVT. Bare boards without plywood over them are not a suitable base.

Does carpet need latex screed underneath?

Not always. A thick underlay hides small bumps, so a sound, flat floor can take carpet as it is. Latex earns its place where carpet tiles or a thin carpet are stuck straight down, or where tile joints, board seams or ridges would wear lines into the pile over time. In a Devizes room with a mixed or patched base, a few millimetres of latex gives the carpet one even surface.

Is latex screed the same as self levelling compound?

They are related. Latex screed is a two part levelling compound in which the powder is mixed with latex liquid instead of water, which helps it grip dense surfaces and tolerate slight movement. Standard self levelling compounds are mixed with water. For tiles, plywood and other awkward Devizes bases, the latex version is usually the one chosen.

Free, no-obligation quote

A fixed price for your Devizes floor