Awkward bases in Newport Pagnell kitchens and bathrooms
Strip out a kitchen in a Newport Pagnell semi and the floor rarely matches from wall to wall. There may be quarry tiles under the old units, a strip of bare concrete where a wall was knocked through, and thin vinyl glued down by a previous owner. Laying a new floor straight over that mix gives bumps and edges that show through a thin finish within weeks.
Latex screed is made for mixed bases like these. The powder is cement based, but it is mixed with a liquid latex rather than plain water. That gives a compound with a little flexibility and a strong grip, which flows out into a smooth, thin coat over a sound floor.
Each base needs its own preparation. Old tiles must be stuck firmly: any that rattle or sound hollow are lifted and the gaps filled before priming. Sound old adhesive can sometimes stay if it is thin, hard and well bonded, while soft or flaking residue comes off. Worn concrete is cleaned and primed to stop it drawing water out of the mix. Where an extension floor is calcium sulphate, its laitance is sanded off and the surface primed without exception.
Upstairs bathrooms sit on timber. Latex is never poured directly onto floorboards, because they move. The boards are fixed down, flooring grade plywood goes over them, and the latex is laid on the ply. The work that comes before any thin coat is covered on our floor preparation page.
Damp floors near Newport Pagnell High Street
Some of the older houses near the High Street have solid floors that sit directly on earth with nothing beneath to stop moisture. A thin coat of latex over a floor like that will not last. Latex does not hold back moisture: damp rising through the slab works against the compound and the adhesive above it, and new vinyl or LVT can blister or lift. Before any compound goes down in an older house, the floor is checked for damp. If it fails, the lasting answer is to dig out and relay with a membrane and insulation, as our page on relaying an old solid floor explains.
Two other faults rule latex out. A floor that springs underfoot will crack a thin coat, so loose boards and weak joists are dealt with first. A floor that is badly out of level, falling away across a room, needs more depth than a few millimetres can give: either a deeper compound, which our Newport Pagnell floor levelling page describes, or a new screed.
When the base is sound, dry and close to flat, latex is a quick way to a surface ready for a thin finish. Drying times follow the product's data sheet, and we pass them on to your fitter.
How we price latex screed in Newport Pagnell
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who lays your latex screed in Newport Pagnell
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Latex Screed from Slough to Newport Pagnell
Newport Pagnell is about 38.5 miles north of our Slough base as the crow flies, with postcodes including MK16 and MK14. The nearest towns to it are Milton Keynes (3.3 miles), Bletchley (6.5 miles), Kempston (9.6 miles) and Flitwick (11.3 miles).
More on latex screed, part of our screeding services.
