Office and unit floors at Interchange Park, Newport Pagnell
Newport Pagnell borders the Tongwell employment area, and Interchange Park on the edge of town has industrial units with offices over two storeys. When a tenant moves out and the offices are refitted, the floor under the old carpet tiles is rarely ready for the new finish. It may be patched, stained with old adhesive or uneven between bays.
To check flatness, BS 8204 uses a 2m straightedge and sets three classes: the gap beneath it may be 3mm at most for SR1, 5mm for SR2 and 10mm for SR3. Thin sheet flooring tends to need SR1, as any dip shows through vinyl or LVT. A typical compound layer runs from roughly 2mm to 10mm, and with a fast drying product the new tenant's flooring can follow soon after, keeping the fit out to time.
The base has to be right first. Old adhesive, paint and weak surfaces are ground or scraped off, and cracks repaired. Grinding also opens up a dusty or sealed surface so the primer can soak in. A primer chosen for the base, be it concrete, screed or old tiles, goes on next. On warehouse and loading areas that carry pallets and forklifts, compound is not the answer, and a high strength screed or concrete floor repair may be needed instead. On the office floors, a thin coat of compound gives carpet tiles, vinyl or LVT a flat, even base for the new tenant.
Flattening older floors in Newport Pagnell homes
A house built in the 1950s or 1960s may still have its original solid ground floor. Decades later it can be dished in the middle of a room, patched where pipes were rerouted, or out of line with a newer extension. Compound can restore a flat surface before large format tiles or LVT are laid over it.
The join between an old floor and an extension screed is a frequent trouble spot. The original floor may have settled, while the new screed is laid to a fresh level, and the two rarely meet exactly. Compound is feathered across the join to give one smooth plane through the knocked-through room, so a single run of LVT or tiles can cross it without a ridge.
The primer changes with the base. Concrete, cement screed and old ceramic tiles each take their own, and a calcium sulphate extension floor must have its laitance sanded off first.
Know the limits, though. A deep dip, a hollow sounding screed or a floor that moves needs repair or a new screed, because thick pours of compound can crack and debond. We say so when that is the case. For a thin smoothing coat over a sound floor, latex screed is another route, and if the floor needs rebuilding, see sand and cement screed in Newport Pagnell.
How we price floor levelling in Newport Pagnell
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Newport Pagnell
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Newport Pagnell
Newport Pagnell is about 38.5 miles north of our Slough base as the crow flies, with postcodes including MK16 and MK14. The nearest towns to it are Milton Keynes (3.3 miles), Bletchley (6.5 miles), Kempston (9.6 miles) and Flitwick (11.3 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
