Levelling floors in post-war Leighton Buzzard houses
Thin floor coverings show every flaw in the floor underneath. A dip that carpet hid becomes a soft spot under LVT, and large tiles rock on a hump. So the target is a measured flatness, checked before and after the pour, not a floor that simply looks level to the eye.
BS 8204 sets the yardstick, literally a 2m straightedge laid on the floor. The largest gap under it may be 3mm for SR1, 5mm for SR2 or 10mm for SR3, and many thin sheet finishes will only go down on SR1.
In a post-war Leighton Buzzard front room, the pour is typically between about 2mm and 10mm, unless a product made for greater depth is used. A primer goes on beforehand, picked to match the base, since old concrete, sand and cement screed, calcium sulphate screed and old tiles all need different ones.
Extensions are another frequent case. The new room and the old house seldom finish at quite the same height, and a feathered coat of compound blends the difference so the flooring carries straight on.
Sometimes compound is the wrong answer. A floor that is loose, hollow, badly cracked or far out of level needs more, because compound poured too deep to hide a failing floor can crack and debond. Then a new sand and cement screed or a targeted screed repair comes first.
Refit floors along Grovebury Road and Chartmoor Road
Leighton Buzzard's main industrial corridor follows Grovebury Road and takes in the Harmill Industrial Estate, while further units line Chartmoor Road. When the office, showroom or welfare area of a unit there is refitted, the floor usually needs preparing before new vinyl or LVT.
The usual sequence is to strip the old covering, grind off adhesive and weak surface, fill cracks and holes, prime, then pour the compound to SR1 or SR2. Using a quick drying compound lets the vinyl or LVT fitter get in soon after, so the refit keeps its pace. We agree the order of work with the fit-out team so the levelled areas are protected from other trades until the covering goes down.
Workshop and production floors are a different matter. Heavy use needs hard wearing concrete, and damage there usually calls for concrete floor repair or grinding the slab rather than a thin compound. Resin and polished concrete floors are outside what we do.
Sanding timber boards is not on our list either. Our levelling work is on mineral floors: concrete, screed and many existing tiled floors, with the correct primer for each.
How we price floor levelling in Leighton Buzzard
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Leighton Buzzard
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Leighton Buzzard
Leighton Buzzard is about 26.6 miles north of our Slough base as the crow flies, with postcodes including LU7. The nearest towns to it are Houghton Regis (6.1 miles), Dunstable (6.2 miles), Bletchley (6.2 miles) and Tring (8.5 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.