Levelling for High Street shops and Park Plaza North units
Commercial floors in Waltham Cross come in two kinds. Along the High Street and around The Pavilions, shop and office refits often strip out old carpet or vinyl to reveal a screed or slab that is patched, stained and uneven. New sheet flooring, LVT or large tiles will show every dip, so the floor is brought flat with compound first.
Further out, the development brief for Park Plaza North proposes business, industrial and logistics uses, possibly including a relocated Fishpools furniture store. Offices, showrooms and welfare areas in buildings like that need the same flat base before their finishes.
Flatness is measured against BS 8204. Put a 2m straightedge across the floor: SR1 allows up to 3mm under it, SR2 up to 5mm and SR3 up to 10mm. Thin sheet finishes often need SR1, so that is what we aim for on a High Street shop being refitted with vinyl or LVT. SR2 is often acceptable under carpet or thicker tiles.
The work starts with preparation. Old adhesive, paint and loose material come off, and a surface that is weak or contaminated may need grinding or shot blasting; our floor preparation service covers that. Then the base gets its primer, chosen to suit calcium sulphate, concrete or sand and cement, before the compound goes on.
Fast drying compounds keep a shop fit-out on programme, so tell us the reopening date when you ask for a price.
When a Waltham Cross floor needs screed, not compound
Most compounds are laid from about 2mm to around 10mm, and some can go thicker. That covers most dips, ridges and joins. It is the right fix where an extension floor meets the original house with a small step, or where an old floor is sound but wavy.
It is the wrong fix for a floor that has failed. Compound poured deep to rescue a failed screed tends to crack and lose its bond with the base, however carefully it is mixed and laid. If the existing screed is hollow, crumbling or several centimetres out, it should come up and be relaid, often in hand-laid sand and cement. We will say honestly which one your floor needs.
On a sound base that only needs a skim, a few millimetres of latex smoothing screed can be enough. And if you are refitting a unit nearby, our levelling work in Loughton covers that area.
This service is for screed and concrete bases. We do not sand wooden floors or advise on DIY levelling products.
How we price floor levelling in Waltham Cross
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Waltham Cross
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Waltham Cross
As the crow flies, our yard in Slough is about 28.4 miles from Waltham Cross, which lies to the east-north-east. Postcodes here include EN8, and Cheshunt (1.2 miles), Waltham Abbey (2.1 miles), Enfield (3.3 miles) and Loughton (4.8 miles) are close by.
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
