info@kandbscreeding.co.uk

Underfloor Heating Screed · Hertfordshire

Underfloor Heating Screed in Waltham Cross

For wet underfloor heating in Waltham Cross we screed over the pipes, pumped or hand laid, at the right depth, with no voids round the pipes and a staged warm-up. The local point is the mix of ages: 20% of homes here were built since 2000, while rear extensions to the older terraces and semis are the other usual place for a heated floor. We screed over the pipes; we do not install the heating system itself.

Heated extensions on Waltham Cross inter-war and post-war homes

The typical heated floor in Waltham Cross is a rear extension on an older terrace or semi. The new room often has underfloor heating while the original house keeps its radiators, and the new floor has to line up with the old one. That means working the depth backwards from the finished floor level: flooring, screed, pipes, insulation.

The screed type decides how much depth you need. With liquid screed, 25mm above the pipes is the minimum, so the whole layer comes out at about 45 to 50mm. For sand and cement the cover rises to about 45mm, which makes the floor deeper overall. Where height is tight against an existing threshold, the liquid option often makes the difference. Our pumped liquid screed page explains how that is laid.

Encapsulation is the other reason the screed matters. Heat has to pass from the pipe into a solid mass with no air pockets. Poured screed wraps every pipe on its own; a hand-laid one has to be packed in around them with care.

Before we pour, the heating installer should have laid and pressure tested the pipes, and the pipes should be clipped firmly so they cannot float. An edge strip along each wall gives the warm screed room to expand. Still missing the insulation or membrane? Our team can supply and lay both as part of our insulation and membrane work.

Switching the heating on in a Waltham Cross flat

Heated floors are common in newer flats, and whether you are fitting out a new apartment or retrofitting an older one, the first warm-up needs patience.

With a calcium sulphate floor, warm-up can usually begin around day 7. Sand and cement asks for more patience: 21 days at least, with the heating left off. Either way, the flow temperature starts low and climbs a little each day, then sits steady for a while before flooring is laid. Turning the heat straight up is a common cause of cracking, and so is switching it off abruptly once flooring is down.

Running the heating also dries the floor, and force drying of calcium sulphate can begin at about 7 days. Flooring still waits on a moisture test, and our page on how drying times are worked out explains the figures.

In 2026 UK figures, a heated floor in liquid screed costs between £20 and £35 per m². For the same service close by, see our heated floor screeding in Enfield page.

Underfloor Heating Screed prices in Waltham Cross

Liquid screed over underfloor heating: £20 to £35 per m² supplied and laid (trade2base, June 2026), so £700 to £1,230 for 35 m². trade2base gives these figures excluding VAT. See our floor screeding cost guide or screed calculator.

Who lays your underfloor heating screed in Waltham Cross

Underfloor heating pipework across a large room before screeding
Underfloor heating pipework across a large room before screeding.

K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.

See what customers say in our Google reviews and on our testimonials page.

Underfloor Heating Screed from Slough to Waltham Cross

As the crow flies, our yard in Slough is about 28.4 miles from Waltham Cross, which lies to the east-north-east. Postcodes here include EN8, and Cheshunt (1.2 miles), Waltham Abbey (2.1 miles), Enfield (3.3 miles) and Loughton (4.8 miles) are close by.

More on underfloor heating screed, part of our screeding services.

FAQs

Underfloor Heating Screed in Waltham Cross: your questions

Can underfloor heating go into an older Waltham Cross house without raising the floor?

Sometimes. Retrofitting heating into an existing ground floor means digging out enough depth for insulation, pipes and screed. Liquid screed helps here, as it needs a thinner layer above the pipes than sand and cement. Whether it works depends on what is under the current floor, so we look at the existing construction and the door thresholds before quoting.

Do you fit the underfloor heating pipes as well?

No. We screed over the pipes, and that is where our work stops: the heating system itself is fitted by others. A heating engineer puts the pipes in, fixes them down and pressure tests them first. When we arrive we check the edge strip, the membrane and the insulation, then lay or pour to the depth that system calls for.

Which flooring works over a heated screed?

Once the heated screed is flat and fully dry, it will take engineered wood, LVT or tiles. Each manufacturer sets its own moisture limit and maximum surface temperature, so check the product sheet. The heating should be commissioned and the screed tested before anything is laid, rather than fitting the floor and warming it for the first time afterwards.

Free, no-obligation quote

A fixed price for your Waltham Cross floor