Liquid screed for Waltham Cross flats and extensions
A pumped floor earns its keep where the area is big and open, or several storeys above the street. In Waltham Cross that means two kinds of job.
The first is the upper-floor flat, whether newly built or being refurbished. Each floor can be poured quickly from a pump at street level, with the hose run up the stairwell or through the core of the building, and liquid screed over insulation is a common build-up in flats.
Then there are rear extensions. The inter-war and post-war terraces and semis tend to need rear extensions, and a new kitchen extension is often one open floor. A flowing screed spreads across that whole area and levels itself, reaching SR1 or SR2 flatness readily. Barely any shrinkage means that kitchen floor needs only a few joints, where a hand-laid one would need many more.
Depth is another point in its favour when a new floor has to meet an old threshold. Floated over insulation in a home, the pour can start at about 35mm, while the sand and cement equivalent needs about 65mm. In commercial buildings the liquid minimum rises to about 40mm.
You can have it as calcium sulphate or as a cement based mix, and the choice turns on two things: could the room get wet, and how soon does the flooring need to go down? Our page on calcium sulphate flow screed covers the material and its grades, and the guide comparing liquid and traditional screeds sets out the trade-offs.
Getting a screed pump into Waltham Cross streets
Our first question for any Waltham Cross pour is where the pump and mixer can sit, because they never come indoors. A house with a front drive is simple. A terrace with permit parking needs a space kept clear on the day, and anything facing the pedestrianised High Street needs a route from a side road or service yard. Hose runs can be long, through a hall or up several flights, as long as the route is clear and protected. For a flat, tell us which floor it is on and whether there is a lift or only stairs, so the hose length and the protection for the common parts can be planned before the day.
Inside, we need edge strip fixed along each wall, the insulation covered by a membrane with its joints taped, and every doorway dammed to hold the liquid in the room.
Then comes drying. Within a couple of days it will bear careful footsteps, but most coverings stay off until the floor reaches the dryness their maker allows. A rough rule for planning: a millimetre of depth dries per day across the first 40mm, and drying slows past that. Cheshunt is next door, and pumped floors in Cheshunt have a page of their own.
Liquid Screed prices in Waltham Cross
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Waltham Cross
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Waltham Cross
As the crow flies, our yard in Slough is about 28.4 miles from Waltham Cross, which lies to the east-north-east. Postcodes here include EN8, and Cheshunt (1.2 miles), Waltham Abbey (2.1 miles), Enfield (3.3 miles) and Loughton (4.8 miles) are close by.
More on liquid screed, part of our screeding services.
