Where pumped screed suits Waltham Abbey homes
The mix is batched away from the house, sent through a hose and settles flat with only light work from the crew. One visit covers a floor that would take a hand-laid team much longer, and SR1 or SR2 surface regularity is readily achievable. Since the material barely shrinks, a wide kitchen-diner can go down with just a few of the joints a trowelled floor would demand.
Three kinds of Waltham Abbey job suit it. The first is the rear extension or knocked-through kitchen on an estate house, where a wide new floor must meet the existing rooms exactly. The second is the flat, where a pump makes an upper floor as easy to reach as a ground floor and the whole flat can be poured in one visit. The third is new building. Only 10% of homes here date from 2000 onwards, but Waltham Abbey North is planned for at least 740 homes, and houses there are likely to use underfloor heating with liquid screed over it.
The base underneath decides the thickness. Laid over insulation it starts near 35mm for a home, rising to 40mm for commercial floors. Pipes in the floor need 25mm or more on top, which brings the depth to roughly 45 to 50mm. There are two binders to choose from, calcium sulphate and cement. The first is the subject of our anhydrite flow screed page for Waltham Abbey, and the second is used where a floor may get wet.
Pump routes on Waltham Abbey estates and flats
The pump lorry needs to park within a hose run of the entrance. On an estate street with a driveway, that is usually straightforward. Where parking is in bays or a shared court, or the house sits along a footpath, the hose may need a longer run, which we plan before the day. Describe the route to your door when you get in touch.
Flats need permission as well as planning. The hose may run through a communal entrance and up a stairwell, so the managing agent should know the date and hours in advance. Floors and walls along the route are protected.
The pour itself is quick. Once it is in, the room is closed to traffic for the first day or so, then it can be walked on with care. Getting it dry enough for flooring is slower: roughly a day for each millimetre up to 40mm, as drying times for screed explains. Our pump comes with our crew; we never rent out pumps or other machines by themselves. Torn between a pump and a trowel? The liquid or traditional screed comparison sets them side by side.
Liquid Screed prices in Waltham Abbey
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Waltham Abbey
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Waltham Abbey
Waltham Abbey is about 30.4 miles east-north-east of our Slough base as the crow flies, with postcodes including EN9. The nearest towns to it are Waltham Cross (2.1 miles), Cheshunt (2.8 miles), Loughton (3 miles) and Epping (4.1 miles).
More on liquid screed, part of our screeding services.
