Levelling Hoddesdon floors before LVT and large tiles
Thin, stiff floor finishes show every flaw underneath. Every small ridge or hollow ends up visible through LVT and sheet vinyl, and a large format tile laid over a dip will rock and may crack. Under BS 8204 the test is simple: rest a 2m straightedge on the floor and see how big a gap opens under it. SR1 tolerates 3mm, SR2 tolerates 5mm and SR3 tolerates 10mm, and the thin sheet products going into Hoddesdon kitchens and hallways tend to ask for SR1.
Typical compound depths run from roughly 2mm to about 10mm, though certain products can be poured thicker. It flows out over a primed base and dries quickly, so the flooring fitter can often start soon after. Which primer we use depends on what is underneath: sand and cement, bare concrete, calcium sulphate and old tiles all take different ones.
A common case in Hoddesdon's post-war and later housing is the join between the original house and a newer extension, where two floors built years apart meet at slightly different heights. Compound feathered across the join brings them into one plane before a continuous floor goes down.
Not every floor should be levelled. If the screed is loose, hollow or cracked through, compound poured on top can crack and debond. Then it needs screed repairs first or a new screed, and we will say so. Where the base needs cleaning back or old adhesive removing, see our floor preparation service.
Shop and office refits at Tower Centre and Pindar Road
Commercial refits bring their own pressure. When a unit in the Tower Centre or Fawkon Walk changes hands, the incoming tenant usually wants the floor flat and ready for new finishes inside a short fit-out window, and compound is often the quickest way to get there. Choosing a fast drying compound keeps the fit-out on schedule.
On the Hoddesdon Business Park campus off Pindar Road, including the New England Industrial Estate, Trident Industrial Estate and Optima Business Park, an office area being refitted inside a unit may need levelling before carpet tiles or vinyl go down. The production floors are a heavier job, where grinding a concrete floor or a high strength screed may be the right answer rather than a thin compound.
Two things sit outside our work: sanding timber floors, and selling bags of compound to anyone planning to lay it themselves. We prepare, prime and lay the compound ourselves, then hand over a flat, sound base for the flooring contractor. If the room has pipes in the floor, read about screed over underfloor heating in Hoddesdon before planning the flooring.
How we price floor levelling in Hoddesdon
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Hoddesdon
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Hoddesdon
As the crow flies, our yard in Slough is about 31.4 miles from Hoddesdon, which lies to the east-north-east. Postcodes here include EN11, EN10 and CM19, and Hertford (3.8 miles), Ware (3.9 miles), Cheshunt (4.1 miles) and Harlow (4.7 miles) are close by.
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
