Workshop and showroom slabs at Bicester Heritage
Motorsport engineering teams now occupy the old RAF Bicester airfield, and their workshops and showrooms depend on level, durable floors. When one of those units changes hands or changes use, the slab underneath rarely arrives clean. Typical leftovers are painted lines, worn floor paint, glue from old vinyl or carpet tiles, and ridges where one concrete bay was finished slightly higher than its neighbour.
Grinding deals with all of these in the same visit. A machine with rotating diamond heads cuts the top of the slab away in thin layers. Coarse diamonds strip coatings and knock down lips; finer ones leave an even, open surface that a primer can soak into. The aim is a sound, clean face, not a shine, so this is not polished concrete.
What follows depends on the new occupier. A levelling compound for a showroom covering, a new wearing screed for a heavy workshop, or a resin system applied by a specialist firm all need the same start: no weak surface skin, no contamination and no sharp steps. We hand the floor over at that stage. Resin and polished finishes are outside our work, and we do not hire out grinders or sell diamond tooling.
Shops and restaurant units around Pioneer Square and at Bicester Village follow a similar pattern on refit, usually across smaller areas and with tighter opening dates. Where a coating is thick or the floor is very large, shot blasting as part of floor preparation can be quicker, and we say so when we price.
Dust, extension joins and garages around Bicester
Concrete, screed and old tiles all contain silica. Grinding them without extraction throws fine respirable crystalline silica into the air, which is harmful to breathe and drifts well beyond the room. We grind only with machines connected to an industrial extractor, seal doorways with sheeting and protect adjoining rooms, so a kitchen can be ground while the rest of the home stays in use.
At home, the usual reason to grind is a join. When an extension slab is cast against an older floor, the two rarely finish at exactly the same height, and a lip runs along the line of the old back wall. Grinding takes the proud edge down so the floors meet. With 49% of Bicester's homes built between 1973 and 1999, many floors lifted for a refit also carry years of adhesive. After grinding, latex over the cleaned surface gives thin flooring a smooth face.
Converted garages raise their own issues: oil marks, old paint and a dense trowelled skin that primers struggle to grip. A light grind opens that surface up.
One limit is worth knowing. Grinding cuts down local high spots; it cannot correct a floor that falls away or sags across the room, and taking too much off a screed can leave it thinner than it should be. In that case we grind the peaks, then pour compound to level a Bicester floor or lay a new screed.
How we price floor grinding in Bicester
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Bicester
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Bicester
As the crow flies, our yard in Slough is about 33.3 miles from Bicester, which lies to the north-west. Postcodes here include OX26, and Kidlington (7.8 miles), Brackley (9.4 miles), Buckingham (10.1 miles) and Oxford (11 miles) are close by.
More on floor grinding, part of our screeding services.
