Refit preparation on Drayton Road Industrial Estate units
When a small industrial unit or a technology firm's office changes hands, the floor under the old finish is rarely ready for the new one. Carpet tile adhesive sets into a hard crust. Painted floors flake. Repairs from earlier tenants stand slightly proud of the slab around them. Lay compound or vinyl straight over any of that and it inherits every weakness.
Grinding cuts all of it back. The machine runs rotating heads fitted with diamond segments that take the surface down in very thin layers. A few passes remove paint, glue and thin coatings, and more work along the joints flattens any ridge where adjoining bays of concrete were finished at slightly different heights. The light profile left behind lets primer soak in and grip.
On the town's business and science parks, and at Milton Park nearby, which shares an Abingdon postcode, a refit typically runs to a tight date. Grinding is then planned area by area, with each space sealed off and extraction running, so the rest of the building can keep working.
We stop at preparation. Resin and polished concrete are laid by specialists, and we hand them a clean, sound floor. Where the slab is breaking up, repairs to the concrete come before grinding, and on very large areas with thick coatings, shot blasting through our floor preparation service may be quicker.
Extension joins and old adhesive in Peachcroft homes
In houses, grinding is usually a smaller, targeted job. Post-war houses in Peachcroft and across the town commonly gain rear extensions or have their garages converted, and both leave a line where new concrete meets old. If the new slab ends up a few millimetres high along that line, the lip is ground off before compound blends the rest. Semi-detached houses are 28% of the town's homes, and a rear extension across the back of a semi is a typical place for such a join.
Replacing a dated floor brings its own clean-up. Pull up old vinyl or carpet and there may be a layer of glue or a painted screed underneath, and both have to go before latex screed in Abingdon-on-Thames, tiles or LVT.
Know the limits. Grinding removes local high spots, but a floor that falls away across a room needs compound or a new screed. It also cannot take much off a screed, which has a minimum depth for its type.
Dust is controlled at every step. Concrete, screed and tiles contain silica, and grinding releases fine silica dust, so our machines run with extraction and the work area is sheeted off from the rest of the house.
How we price floor grinding in Abingdon-on-Thames
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Abingdon-on-Thames
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Abingdon-on-Thames
Abingdon-on-Thames is about 29 miles west-north-west of our Slough base as the crow flies, with postcodes including OX14. The nearest towns to it are Didcot (4.7 miles), Oxford (5.7 miles), Wantage (8.4 miles) and Kidlington (10.5 miles).
More on floor grinding, part of our screeding services.
