Unit floors on Carterton's industrial estates
Several of the small units on Carterton Industrial Estate are car garages, and floors used that way collect oil, tyre marks, painted bay lines and patches of old coating. When a unit there, at Ventura Park, on West Oxon Business Park or on South Carterton Industrial Estate takes a new occupier, getting back to clean concrete is usually the first task before any new floor.
A grinder does that by cutting the surface away in thin passes. Coarse diamond segments take off coatings, paint and glue; finer ones leave an even, slightly open texture. Lips where two concrete bays meet, trowel marks and small high spots come down at the same time.
What the unit needs next decides how far we go. A new sand and cement wearing screed wants a clean, keyed surface; a levelling compound wants one free of dust and contamination; a resin floor laid by a specialist wants the same, to whatever surface texture that specialist asks for. We prepare to that point and hand over. Resin, polished concrete and coloured floor paints are not something we apply.
Oil that has soaked deep into a slab is the hard case. Grinding removes surface staining, but deeper contamination may need cutting out, and we tell you before starting. Where the area is very large or the coating thick, shot blasting or scarifying can be quicker, as set out under floor preparation before new screed. If grinding exposes cracks, holes or a broken edge, repairing the concrete comes next.
Extension joins and garage slabs in Carterton homes
Extensions are common on both the newer Carterton houses and the older ones. Where a new slab or screed is joined to an existing floor, a lip usually forms along the old wall line. Grinding takes the high side down so both floors finish flush, ready for one continuous covering.
A garage turned into a room often has a dense, trowelled slab, sometimes painted. Primers and compounds struggle to grip that skin, and a light grind opens it up.
Lifting old carpet or vinyl in an older house usually leaves adhesive behind. Thin, hard residue can sometimes be primed over, but soft or patchy glue has to come off, and grinding is the clean way to do it. A thin latex coat for vinyl can then follow.
Silica is the reason we work the way we do. Concrete, screed and tiles all contain it, and grinding without extraction releases fine dust that is harmful to breathe. Every machine runs through an extractor, doorways are sealed with sheeting, and nearby rooms are protected.
Grinding has a limit. It removes bumps; it does not correct a floor that slopes across the room, and over-grinding a screed can leave it too thin. Where that is the problem, the high spots come down first, and then self levelling compound in Carterton or fresh screed brings the room flat.
How we price floor grinding in Carterton
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Carterton
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Carterton
Carterton is about 43.7 miles west-north-west of our Slough base as the crow flies, with postcodes including OX18. The nearest towns to it are Witney (5.1 miles), Kidlington (13.8 miles), Wantage (13.9 miles) and Oxford (14.5 miles).
More on floor grinding, part of our screeding services.
