Flattening Letchworth floors for LVT, vinyl and tile
Thin flooring shows everything underneath it. A ridge or hollow of a few millimetres will telegraph through LVT or sheet vinyl, and a dip under a large tile leaves it rocking or cracking. BS 8204 grades flatness by the gap under a 2m straightedge: SR1 is 3mm, SR2 is 5mm and SR3 is 10mm. Thin sheet flooring often asks for SR1.
Levelling compound closes that gap. Typical depths run from about 2mm to around 10mm, a few products go thicker, and it spreads itself into a smooth finish that takes flooring soon after. What lies under it matters too: sand and cement, bare concrete, calcium sulphate screed and old ceramic tiles each get their own primer.
Extensions on the Grange, Jackmans, Lordship and Manor Park estates are a typical case. When a new floor meets an older one, the two rarely line up perfectly, and a compound feathered across the join gives one continuous level for a floor that runs from the kitchen into the new room.
Some floors are beyond a skim, though. If the screed underneath is cracked, hollow or crumbling, compound on top can crack and debond. We will tell you when a floor needs screed repair work or a new screed instead. For a garden city cottage with a failed solid floor, a new sand and cement floor in Letchworth is usually the better route.
Office refits at Letchworth Business Park and Icknield Way
Commercial floors in Letchworth range from offices to production space. Letchworth Business Park covers more than 50 acres of both, and the employment areas along Works Road, Blackhorse Road, Icknield Way and the former Spirella site add further commercial floor space to that.
Office refits usually need the floor flat enough for carpet tiles or vinyl, and done within a tight fit-out programme. With a fast drying compound, the carpet tile or vinyl fitter can start soon after. Before the compound goes down, old adhesive, loose screed and contamination have to come off, which is part of our floor preparation service.
Production and warehouse floors are a heavier job. A thin compound will not stand up to forklift traffic, and those floors call for concrete repair, grinding or a high strength screed instead.
We do not sand wooden floors or sell products for DIY levelling. We prepare, prime and lay the compound with our own team, then hand over a flat base ready for flooring. For a nearby comparison, see floor levelling in Baldock.
How we price floor levelling in Letchworth
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Letchworth
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Letchworth
On the map, Letchworth sits north-north-east of Slough, about 35.5 miles from our base in a straight line (postcodes including SG6), next to Baldock (2 miles), Stotfold (2.7 miles), Hitchin (2.9 miles) and Stevenage (5.3 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
