Levelling floors in Stotfold homes before LVT and tiles
Thin, rigid floor finishes show everything under them. Click LVT, sheet vinyl and large format tiles need a flat base, and many floors that seem fine underfoot turn out to have dips and ridges once a straightedge goes down.
Under BS 8204, a 2m straightedge is laid on the floor and the biggest gap beneath it sets the class. Up to 3mm counts as SR1, up to 5mm as SR2 and up to 10mm as SR3. Thin sheet vinyl often needs SR1, and LVT manufacturers usually want a floor near that standard.
Most compound is put down at between about 2mm and roughly 10mm, with a few products rated thicker. Poured out, it settles flat by itself, and quick drying versions stop it holding up the rest of the refit. For the thinnest skims, a latex screed is often used.
Two situations are typical in Stotfold homes. One is an extension meeting the old house, where the two floors are rarely perfectly aligned, and a skim across the junction gives one surface. The other is a conversion. Converted flats make up 4% of the town's homes, and floors in older converted buildings often need levelling before new finishes.
Priming is essential. Sand and cement, concrete and calcium sulphate screed each need a matching primer, and the wrong choice is one of the main reasons compound lifts. Where the floor is heated, check our Stotfold underfloor heating screed page for how that affects the finish.
Workshop and office floors at Fen End, Astwick Road
Stotfold's industrial buildings sit mainly around Fen End off Astwick Road. Units there have been marketed with production floor space, offices and roller shutter access for forklifts and deliveries. When a unit is refitted for a new occupier, any new carpet tiles or vinyl in the offices need a flat, primed base.
Production floors are different. Forklift traffic and machinery need a durable surface, and levelling compound is not the answer for a damaged or heavily worn slab. There, damaged concrete is repaired first, through our concrete floor repair service, or the surface is ground back before a new finish.
We are honest about where compound stops. Deep pours to correct a floor that needs a screed can crack and debond, so when a floor is too far out, cracked through or breaking up, we recommend a new screed instead and price that.
Timing can be planned around the business. Fast drying compounds let office areas take their new finish quickly, so partitions, lighting and furniture can follow without a long gap in the programme.
For refits in Stevenage, see floor levelling in Stevenage.
How we price floor levelling in Stotfold
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Stotfold
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Stotfold
Stotfold is about 37.9 miles north-north-east of our Slough base as the crow flies, with postcodes including SG5 and SG15. The nearest towns to it are Baldock (2.6 miles), Letchworth (2.7 miles), Hitchin (5 miles) and Biggleswade (5.1 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.