Preparing new slabs at Stroudwater Business Park
A large new slab almost never arrives ready for its final finish. Where adjacent bays were cast on different days there are small steps at the joints, power trowelling leaves marks, and curing draws a thin, weak layer of laitance to the top. A floor finish laid over that layer is only as strong as the layer itself.
Grinding removes the problem at the source. Diamond segments on a rotating head cut the surface down in very shallow passes, flattening joint steps and trowel marks and taking off the laitance until hard concrete shows. A primer or adhesive then bonds to the slab itself.
On the Stroudwater 13 phase at Stonehouse, and in the business units planned for Brimscombe Port, finishes could range from carpet tiles and vinyl to a painted warehouse floor or a resin system. Our part is the preparation, plus any levelling or screed that follows. Resin and polished concrete are specialist trades we do not offer, so where a coating is specified we hand over a clean, ground slab for that contractor to work on. Larger unit floors needing a new topping are covered by our commercial screeding page.
Grinding is not always the quickest method. For a whole warehouse floor or a heavy existing coating, shot blasting or scarifying can strip the surface faster, and both are described under floor preparation and shot blasting.
Garages, extensions and old adhesive in Stroud homes
Domestic floors need grinding for smaller, more fiddly reasons. Lift a vinyl that has been glued down for decades and the slab underneath carries a skin of old adhesive that fresh primer will not hold to. Ground back to clean concrete, the floor is ready for compound and a new finish.
Extensions in Stroud are most often added to post-war semis, and the join where a new slab meets the original at the old back wall often leaves a lip. Taking the high side down with a grinder, then running compound across the join, lets one floor covering pass straight through, as described on our levelling compound page for Stroud.
Garages being converted bring paint, oil and a dusty, worn top. Detached houses are 21% of Stroud's homes, and where one of those has a garage becoming a room, grinding comes before the insulation and screed go down.
Grinding has two firm limits. It removes high spots but cannot correct a floor that falls or sags across a whole room, and grinding too deep into a screed can leave it below its minimum thickness. Silica dust is the other concern, so our machines always run with extraction attached and neighbouring rooms are sheeted off.
How we price floor grinding in Stroud
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Stroud
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Stroud
On the map, Stroud sits west-north-west of Slough, about 69.2 miles from our base in a straight line (postcodes including GL5, GL10 and GL6), next to Gloucester (8.3 miles), Cirencester (10.9 miles), Cheltenham (12.3 miles) and Yate (16.6 miles).
More on floor grinding, part of our screeding services.
