Grinding unit floors at Widford Industrial Estate
An industrial or office unit floor collects layers over the years. One tenant paints it, the next lays carpet tiles on a tackifier, another bolts racking down and leaves the fixings behind. When the unit is let again, the new finish, whether compound and vinyl, a fresh screed topping or a resin system laid by another firm, needs bare, clean concrete underneath.
Diamond grinding provides that. Heads fitted with diamond segments turn against the slab and shave its surface away in thin layers. With the right tooling the same machine strips paint and glue, flattens trowel marks and ridges at bay joints, and removes the weak laitance from a newer pour. The surface left behind is open and textured, so primers soak in and compounds bond.
At Widford Industrial Estate, the Waterhouse Lane employment area and Chelmsford Business Park, fit-outs tend to run to a programme, and grinding is the first trade on the floor. Doing it properly saves time later, because a compound laid over residue can debond in patches after the tenant has moved in.
Grinding is not a cure for every floor. It removes local high points but will not correct a slab that slopes from one end to the other or dips across a wide area. Those floors are ground where needed, then brought level with compound or screed. Taking too much off a screed can also leave it thinner than its minimum depth. For larger stripping jobs, shot blasting through our floor preparation service may be faster.
Extension joins and garages in Great Baddow and Springfield
Post-war semis around Great Baddow and Springfield are often extended at the rear, which means a new floor meeting one laid decades earlier, and the two do not always line up. Where one side stands a few millimetres proud, grinding it down before compound or a new finish goes over keeps the join flush.
Homes built from 1973 to 1999 make up 26% of Chelmsford's housing, and floors of that age have often had carpet or vinyl stuck down more than once. When the covering comes up, the black or yellow adhesive left behind must be removed before new tiles or LVT, and a grinder does it far more cleanly than a scraper. Garages being converted into rooms often have paint, oil stains and a dusty top that need the same treatment before a membrane or bonded screed.
Silica dust is why we take this seriously. Concrete, screed and tile all contain crystalline silica, and grinding releases it as a fine dust that can damage the lungs. Our grinders run only with extraction connected, doorways are sealed and nearby rooms are protected. Once the floor is clean, latex screed for Chelmsford refits can give a smooth skin for thin finishes.
How we price floor grinding in Chelmsford
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Chelmsford
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Chelmsford
Chelmsford is about 50.2 miles east-north-east of our Slough base as the crow flies, with postcodes including CM1, CM3 and CM2. The nearest towns to it are Billericay (8.2 miles), Witham (8.4 miles), Wickford (8.8 miles) and Maldon (8.8 miles).
More on floor grinding, part of our screeding services.