Preparing shop floors at the Maybird and Rosebird Centre
A retail unit that changes hands rarely comes with a clean floor. The outgoing tenant leaves adhesive from carpet tiles, painted walkways, a patch of thin coating, and in older units a ridge or lip where two concrete bays meet. Any of those will show through new LVT or stop a levelling compound from bonding.
Grinding deals with them by cutting the surface away in thin layers. Rotating diamond heads take down the high spots and trowel marks, scrape off residue and remove the weak laitance that sometimes sits on top of a screed. What is left is a sound, open surface that a primer can grip.
Those are the conditions found in retail units generally, and in Stratford that means shops at the Maybird out on Birmingham Road, the Rosebird Centre on Shipston Road and Bell Court in the middle of town. It also suits the restaurants and hotels that serve the visitor trade, where a refit runs to a tight date.
After grinding, the floor goes to whoever lays the next layer. That might be our own compound or screed, a resin system laid by another contractor, or the flooring fitter directly. If a base needs a thin smoothing layer before the finish, our Stratford floor levelling service follows on.
Shopping centres bring one extra constraint: neighbouring units stay open. The silica in concrete and screed becomes fine, harmful dust under a grinder, so the machine is always connected to an extractor, and doorways and adjoining areas are sheeted off before the first pass.
Extensions, garages and lifted carpets around Stratford-upon-Avon
Houses need grinding too. Homes built from 1973 to 1999 make up 20% of Stratford-upon-Avon's housing, and when a house of that age gains an extension, the new slab and the old one rarely finish at exactly the same height. The result is often a small lip at the doorway. Grinding takes that edge down so the finish runs across without a bump.
There is a limit. Grinding removes local high spots. A floor that falls away or sags across most of a room is a different problem. Trying to grind a whole room level would cut far too deep, and on a screed it could leave the layer thinner than its minimum depth. The sensible sequence is to grind the high points, then level or screed the rest.
Garages are another job. Before one becomes a room, the floor often carries oil stains, old paint and a dusty top. Grinding opens it up ready for a membrane and screed, and our garage floor screed guide explains what comes next.
Carpet and vinyl lifted from an older floor usually leave adhesive behind. Thin, hard residue grinds off cleanly. Thick coatings or very large areas can be quicker by shot blasting or scarifying, both covered under floor preparation.
How we price floor grinding in Stratford-upon-Avon
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Stratford-upon-Avon
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Stratford-upon-Avon
On the map, Stratford-upon-Avon sits north-west of Slough, about 64.4 miles from our base in a straight line (postcodes including CV37), next to Warwick (8 miles), Royal Leamington Spa (10 miles), Kenilworth (11.7 miles) and Evesham (12.4 miles).
More on floor grinding, part of our screeding services.