Grinding for shop and office refits in Beaconsfield New Town
Shops and offices on the Old Town and New Town high streets come and go, and an outgoing occupier rarely leaves a bare slab. Lift carpet tiles and there is a film of tackifier. Strip out vinyl and there are ridges of hardened adhesive. A former café may have a painted or sealed concrete floor. None of that gives a new compound or adhesive anything to hold, so it has to come off.
A grinder does that work mechanically. Rotating diamond segments cut the top of the slab away in very thin layers, so contamination, laitance and minor high spots disappear and the surface left behind is open and clean. On a refit, that surface is then primed and levelled, or handed straight to the floor layer if it is already flat enough.
Wilton Park adds new commercial ground. Its consent includes 1,730 sq m of commercial space beside the homes, and a unit fitted out for its first tenant can still carry trowel marks, lips between pour bays and laitance that want grinding before the finish goes down.
Dust shapes how we work. Concrete, screed and tile all contain silica, and cutting them creates respirable crystalline silica dust fine enough to hang in the air unseen. We grind only with extraction connected at the head, and seal doors and openings to neighbouring units before starting. Where a high street shop has offices or flats above, that protection is agreed with the landlord beforehand. We are a contracting team: we do not sell or hire out grinders or tooling.
Extension joins and garages in Beaconsfield houses
Large detached houses here are often extended or refurbished on a big scale, and a new slab cast against an older house rarely meets it perfectly. Some 15% of Beaconsfield's homes were built between 2000 and 2014, and even on those the join to a newer extension can finish a few millimetres proud. A tiler or LVT fitter cannot hide that lip. Grinding takes it down, and any remaining change in level is feathered out with compound.
Garages are similar. A garage slab carries oil marks, paint and years of grit, and if it is becoming a gym, studio or utility the top needs cleaning back to sound concrete before anything is bonded to it. Our garage conversion floor guide sets out the full build-up.
Lifting old flooring is the third case. In an older room, taking up carpet or vinyl can reveal hard black adhesive that no new glue or compound will grip, and a grinder clears it.
Grinding is for local faults. It removes high spots; it cannot raise a dip or correct a floor that falls across the whole room, and taking off too much can leave a screed thinner than its minimum depth. Where the whole floor is out, we grind the peaks and then level with self levelling compound for Beaconsfield floors, or lay a new screed. We do not lay resin or polished concrete; if that is your finish, we prepare the slab for the specialist.
How we price floor grinding in Beaconsfield
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Beaconsfield
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Beaconsfield
Beaconsfield is about 5.4 miles north of our Slough base as the crow flies, with postcodes including HP9 and HP10. The nearest towns to it are High Wycombe (4.7 miles), Amersham (4.9 miles), Chorleywood (6.2 miles) and Marlow (6.3 miles).
More on floor grinding, part of our screeding services.
