Levelling older Halstead floors before new finishes
Thin floorings give away every hollow. Vinyl and LVT take the shape of whatever is under them, and big tiles will rock or crack on a base that is out. A lot of flooring manufacturers specify SR1, meaning a deviation of 3mm at most under a 2m straightedge; under the same test SR2 permits 5mm and SR3 10mm.
Few old solid floors reach SR1 without help. Compound normally goes on at anything from about 2mm to roughly 10mm, and certain products can be laid thicker, so ripples, trowel lines and small steps can be taken out without rescreeding. In a low-ceilinged Halstead cottage, that slim section is the main reason to choose it.
First we deal with the base. Anything loose, any old adhesive and any weak skin on the surface gets removed, with grinding or shot blasting through our floor preparation work where it is needed. Next, a primer suited to whatever is underneath, from old tiles to concrete, sand and cement or calcium sulphate, and then we pour and spread the compound.
Trouble often shows where a new extension butts up to the old house. Both floors may have been meant to finish level, but a difference of a few millimetres still shows through a continuous run of flooring, and compound laid over the line evens the two out.
Where the correction is only a few millimetres, a thin latex screed may do the job.
Refits at Bluebridge Industrial Estate and when to rescreed
Bluebridge Industrial Estate sits east of Halstead town centre off the A1124, with builders merchants, storage, light industrial units and recent business units on Sixth Avenue. Refitting an office or showroom area in one of those units often means levelling the existing floor before carpet tiles, vinyl or LVT go in, and fast drying compounds stop the floor from holding up the rest of the refit.
Piling on more compound will not rescue every floor. Building it up thicker and thicker over a floor that has sunk, cracked badly or come unbonded can end in cracks and debonding further down the line. A floor that is damp, sounds hollow or moves underfoot needs replacing with fresh screed, and we will tell you that plainly rather than sell you compound that will not last. For older homes, our Halstead sand and cement screed page explains that alternative.
Most houses in the town are semis or terraces, so a domestic job here is often one room or a through lounge ahead of new flooring. Bigger commercial floors are priced on the same basis: area, how much correction is needed and the finish. If you also have a floor in Haverhill, see Haverhill floor levelling.
How we price floor levelling in Halstead
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Halstead
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Halstead
As the crow flies, our yard in Slough is about 61.8 miles from Halstead, which lies to the east-north-east. Postcodes here include CO9, and Braintree (5.7 miles), Sudbury (7.8 miles), Witham (10 miles) and Colchester (12 miles) are close by.
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
