Grinding unit floors on Orchard Road and York Way
Orchard Road and York Way form Royston's main industrial and employment area, with occupiers such as Johnson Matthey, and the area now links through to the trade and retail park at Royston Gateway beside the A505. Warehouse, trade counter and production floors take hard use, and when a unit changes hands or is refitted the slab usually carries a layer the next occupier does not want.
That might be worn floor paint, old line marking, a failed thin coating, adhesive from vinyl in an office corner, or a skin of weak laitance on a slab that was never properly finished. Grinding removes it. The grinder's spinning diamond segments wear the surface down a sliver at a time, bringing down small ridges and trowel marks as they go and leaving an open surface that a primer or new topping can bond to.
Where a client plans a resin floor, our part ends at the prepared slab and another contractor lays the resin. Resin and polished concrete are not part of what we install. For very large floors, or where a coating is thick, shot blasting or scarifying may be quicker, and both sit under our floor preparation and shot blasting service. Broken or spalled concrete under the coating is a repair before anything else, handled through our concrete floor repair service.
On Royston Business Estate and at Royston Gateway the approach is the same, with the work area sealed off from the rest of the building while we grind.
Royston homes: extension joins, garages and old glue
In a house, grinding is a smaller and more precise job. Extensions on Royston's 1980s and 1990s houses can leave a lip where the new slab meets the old floor. Taking that lip down lets the finished floor run straight through, and a skim of compound completes the join.
Garage conversions are another case. A garage slab may carry oil, paint or sealer that would stop new screed or compound from bonding, and grinding clears it before the insulation and screed layers described in our garage floor screed guide go in.
There are limits. Grinding removes high spots; it does not raise low ones. A floor that dips across the middle of a room, or falls towards one wall, needs the high areas ground and the rest levelled or screeded. Grinding a screed too far can also leave it below its minimum thickness, so we measure before cutting.
Every grind runs with dust extraction. Concrete and screed contain silica, and the fine dust a grinder throws up is a health risk, so the machine is connected to an extractor, doorways are sheeted and the rest of the house is kept closed off. Stevenage, some 12.7 miles from Royston, is covered on our Stevenage concrete grinding page.
How we price floor grinding in Royston
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Royston
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Royston
On the map, Royston sits north-east of Slough, about 44.6 miles from our base in a straight line (postcodes including SG8), next to Baldock (8.3 miles), Stotfold (9.3 miles), Letchworth (10.2 miles) and Biggleswade (10.7 miles).
More on floor grinding, part of our screeding services.