Preparing unit floors on Shire Hill Industrial Estate
Shire Hill Industrial Estate is close enough to walk to from the centre. Any warehouse or trade unit floor that has been in use for years can carry the marks of whoever had it last: painted walkways, glue from carpet tiles or vinyl, patched areas standing proud, and ridges where one bay of concrete was finished higher than the next.
A diamond grinder deals with all of that by cutting. Its heads spin against the slab and shave the top away in very thin passes, so a lip between bays can be brought down to its neighbour, a trowel mark taken off and a coating removed down to bare concrete. Weak laitance on the surface comes away in the same pass, which matters because primers and compounds need sound material to grip.
What the floor is being prepared for decides how far we go. A unit getting carpet tiles may only need adhesive and paint taken off before a smoothing compound; one getting a new screed needs a clean, open surface to bond to. Where a resin coating is planned, we grind the slab ready and the resin contractor takes over, because resin and polished concrete are outside what we do.
Grinding suits targeted areas and thin coatings. Across a large floor carrying a thick coating, shot blasting or scarifying may be quicker, and our floor preparation work covers those methods. For the compound that often follows, see levelling a Saffron Walden floor.
Extensions, garages and old glue in Saffron Walden homes
Houses need grinding more often than people expect. Detached homes make up 25% of Saffron Walden's housing, and where one has a garage being turned into a room or a new extension being opened into it, the join between slabs is a typical problem. New concrete rarely finishes exactly flush with old, and a small ridge at the doorway will show through any thin finish. Grinding takes the high side down so a compound can feather the rest.
Garage slabs often carry floor paint, and lifted carpet or vinyl in an older room tends to leave adhesive behind. Both have to come off before a latex screed over the ground slab or a new covering, because neither will hold to a film that is already letting go.
Grinding has limits we explain before pricing. It removes local high spots; it cannot correct a floor that slopes or sags across the whole room, which is a job for levelling compound or a new screed. Taking too much off a screed can also leave it below its safe minimum depth.
Dust is the other issue. Silica is present in concrete, screed and tile, and once ground it becomes a fine dust that is harmful to breathe, so we only grind with dust extraction attached and sheet off rooms next to the work. Homeowners near Bishop's Stortford can find the same service listed there.
How we price floor grinding in Saffron Walden
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Saffron Walden
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Saffron Walden
Saffron Walden is about 51 miles north-east of our Slough base as the crow flies, with postcodes including CB10. The nearest towns to it are Haverhill (9.3 miles), Bishop's Stortford (11.1 miles), Royston (11.3 miles) and Great Dunmow (11.7 miles).
More on floor grinding, part of our screeding services.