Preparing unit floors in Haverhill's south side industrial area
Haverhill's economy leans heavily on industry. International Flavors & Fragrances, EuroAPI and Sigma-Aldrich all run plants in the town, and process or laboratory floors of that kind have their flatness, strength and resistance to chemicals designed in at the outset. Any chemical resistant topping is laid by a specialist firm, not by us. What it needs from below is a clean, sound and slightly textured concrete or screed surface it can bond to.
Grinding provides that. Rotating heads fitted with diamond segments cut the surface away in thin passes, taking off laitance, worn floor paint, thin coatings and old adhesive. The same passes take down trowel ridges, high spots and the lips that form where two pours or bays meet, so a new coating or levelling compound sits flat rather than following every step.
When a unit changes tenant, the floor often carries a previous occupant's coating or line markings. These are usually thin enough to grind off. Thick or multi-layer systems over a large area may suit shot blasting or other preparation methods, which we can price instead.
The ground surface then goes forward to the next trade or to us. If it needs bringing within a flatness class for vinyl or carpet tiles in an office area, levelling compound on the ground slab follows.
To be clear on scope: we leave resin and polished concrete to others, and no grinders or tooling are sold or hired out by us.
Kitchen extensions and old slabs in Haverhill homes
Houses need grinding too, on a smaller scale. A new kitchen extension has to meet an existing slab, and where the two meet there is often a raised edge or a strip of old mortar from the wall that came down. Grinding that line lets a thin compound or a new floor finish run across both.
Floors that have been patched over the years can carry several old adhesives, paint from a utility room or a garage, and repair mortar standing proud of the surface. Detached houses make up 24% of the town's homes. Whatever the house type, the method is the same: grind off what will not bond, check the concrete underneath is sound, then decide what goes on.
Grinding has limits. It deals with local highs; it cannot correct a floor that has settled into a slope or a broad dip. For that, grind the high spots and then level or screed. Overdoing it can also take a screed below the thickness it was designed to have.
Dust is controlled throughout. Concrete and screed contain silica, and cutting them releases fine dust that is harmful to breathe, so the grinder always runs with extraction attached and doors to other rooms are sealed. Where cracks or broken areas show up once the surface is clean, concrete floor repair comes next.
How we price floor grinding in Haverhill
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Haverhill
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Haverhill
On the map, Haverhill sits north-east of Slough, about 60 miles from our base in a straight line (postcodes including CB9), next to Saffron Walden (9.3 miles), Newmarket (11.2 miles), Halstead (12.7 miles) and Sudbury (12.9 miles).
More on floor grinding, part of our screeding services.
