Grinding unit floors at South Hampshire Industrial Park
About 1.6 miles from junction 2 of the M27, on the north side of Totton, Calmore Industrial Estate includes South Hampshire Industrial Park. Its occupiers range from parcel and postal operators to a kitchen supplier. Slabs in working units like these can collect years of wear: tyre marks, line paint, worn coatings and patch repairs that sit slightly proud of the floor around them.
A grinder works by spinning diamond heads against the surface, cutting the top away in thin, controlled passes. That takes down ridges and trowel marks, flattens the lips that form where two bays of a slab meet, and strips paint, sealer and thin coatings back to sound concrete. What remains is clean and open textured, ready for levelling compound, a new screed, a resin system fitted by another contractor or new flooring.
There is a limit. Grinding deals with local high spots, not a floor that slopes or dips across a wide area. Try to grind a falling floor flat and you remove a great deal of material to little effect, and on a screed you risk leaving it thinner than its minimum depth. The sensible order is to grind the high spots, then bring the low areas up with compound over the ground slab or a fresh screed.
For very large areas, or coatings too thick to grind economically, shot blasting or scarifying can be the better tool, and both are covered under our floor preparation service. We look at the slab and the coating before advising which suits.
Garages, extensions and lifted floors around Totton
Houses need grinding too, usually in smaller doses. When an extension slab is poured against an existing floor, the two rarely finish at exactly the same height, and a small lip at the join will show through LVT or sheet vinyl. Grinding the high side down, followed by a thin coat of compound, is often quicker than packing the low side.
Lifting old carpet or vinyl tends to expose adhesive: black bitumen, yellowed latex or brittle residue that new compound will not bond to reliably. Garages being turned into rooms bring oil stains and floor paint. In each case the grinder cuts back to clean concrete or screed so the primer has something sound to hold.
Dust is the serious part. Silica is present in concrete, screed and tiles alike. Cutting into them puts respirable crystalline silica into the air, and that fine dust should never be breathed. We grind only with extraction connected at the head, sheet off doorways and protect the rooms next to the work. Expect noise for the duration, but not a house covered in grey dust.
Where the floor is cracked or broken, not just dirty, grinding alone will not fix it, and concrete floor repair is the place to start. If a thin smoothing layer follows the grind, our page on latex over awkward Totton bases explains that step.
How we price floor grinding in Totton
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Totton
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Totton
Totton is about 56 miles south-west of our Slough base as the crow flies, with postcodes including SO40. The nearest towns to it are Southampton (3.8 miles), Romsey (4.9 miles), Eastleigh (6.9 miles) and Hedge End (8.1 miles).
More on floor grinding, part of our screeding services.