info@kandbscreeding.co.uk

Concrete Floor Grinding · Hampshire

Concrete Floor Grinding in Aldershot

Our own team grinds concrete slabs and screeds in Aldershot, always with dust extraction, to clear raised areas, bay lips, laitance, glue and painted or coated surfaces. What follows might be levelling compound, a new screed, new flooring or a resin from another firm, and each needs a clean, sound surface. Units on the town's main industrial estate, Blackwater Valley Industrial Park close to the A331, are the kind of floor where old coatings may need taking off before a new finish.

Grinding unit floors around Blackwater Valley Industrial Park

Spinning diamond segments shave the slab surface off a fraction at a time. On an industrial or trade unit floor that removes what the last tenant left behind: painted walkway lines, worn floor paint, adhesive from carpet tiles or vinyl, ridges where slab bays meet and the weak, dusty top skin called laitance.

For a unit at Blackwater Valley Industrial Park or on Blackwater Way, the reason for grinding is usually what goes down next. Levelling compound will not bond to paint or dust. A new screed needs a clean, open surface to grip. A resin floor laid by a specialist needs the same, and we prepare the slab for them, though resin and polished concrete are not finishes we put down ourselves.

Shops and leisure units in the town centre bring a different version of the same job. At Westgate Leisure Park and in the Union Yard redevelopment of Union Street East, a fit-out can mean lifting tiles or sheet flooring and grinding off the bed of adhesive before the next finish goes down.

We are a contracting team, not a tool shop, so machines and diamonds stay with us and are never sold or hired out. On a big floor or under a heavy coating, shot blasting or scarifying can be quicker, and both sit under our floor preparation work. Where the slab under the coating turns out to be cracked or breaking up, concrete floor repair comes before any new finish.

Extension joins and garages across Aldershot homes

In houses, grinding is usually a small, targeted job. Homes built between 1945 and 1972 make up 18% of Aldershot, and mid-century semis are where kitchen and rear extensions most often come up. Where the new extension slab meets the old floor, there is often a lip or a hump of a few millimetres. Grinding that line down, then laying levelling compound across both floors, gives the new finish one continuous surface.

Detached houses are 11% of the town's homes, and a garage floor of any age tends to collect paint, oil and sealer. Before a garage becomes a room, that surface is ground back so the new layers bond.

Old adhesive is the other common reason. Lift a carpet or vinyl and the black or yellow residue underneath can stop a new adhesive or compound sticking.

Grinding has limits. It shaves off local high spots, but a room that falls or sags from one side to the other stays that way; the bumps are ground first and then levelling compound or a new screed brings it true. Grinding a screed too hard can also take it below the depth it needs.

Silica is present in concrete, screed and tile, and grinding turns it into a fine dust. We grind only with extraction running and seal off the rooms around the work. The same service covers floor grinding in Farnborough too.

Preparing old floors in Wellesley's converted military buildings

Wellesley, the Aldershot Urban Extension on former military land, mixes new build streets with historic buildings such as the Cambridge Military Hospital that are being converted to homes. Levelling inside those old buildings comes up, and grinding can be the step that makes it possible.

Floors in a building that has served another purpose for decades can carry almost anything on their surface: paint, sealers, hard old adhesive, patches in different materials and ridges where earlier works met. A levelling compound needs a clean, sound and open surface to bond to, and none of those layers provides one. Diamond grinding, with extraction connected, cuts them away and exposes the concrete or screed below so the primer can soak in.

Old floors also need checking before they are ground. We sound them for hollow patches and look for cracks, because grinding a weak topping can break it up further, and any failing area is repaired before the compound goes down. Where a floor turns out to be timber rather than concrete, grinding is not the answer, and it is prepared another way, such as overboarding before a compound.

A converted building can also hold more than one kind of floor. One room may be original concrete, the next a newer screed laid when services were moved, and a corridor patched in something else again. Each is ground only as far as its own surface needs, and the whole area is then primed and levelled as one.

How we price floor grinding in Aldershot

A fixed written price within 24 hours, once we know the area and what has to come off. See our concrete floor sanding guide.

Who grinds your concrete floor in Aldershot

Room prepared with blue edge strip and membrane ready for screed
Room prepared with blue edge strip and membrane ready for screed.

K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.

See what customers say in our Google reviews and on our testimonials page.

Concrete floor grinding from Slough to Aldershot

As the crow flies, our base in Slough is about 20.1 miles from Aldershot, which lies to the south-south-west. Postcodes here include GU11 and GU12, and Farnborough (2.8 miles), Farnham (2.9 miles), Fleet (4.1 miles) and Frimley (4.6 miles) are close by.

More on floor grinding, part of our screeding services. For every screed we lay locally, see floor screeding in Aldershot.

FAQs

Concrete floor grinding in Aldershot: your questions

Can grinding fix a sloping concrete floor?

Not on its own. Grinding takes off ridges, humps and lips in thin layers, but a floor that falls or dips across a whole room needs material adding, not removing. The usual answer is to grind the high spots, then lay levelling compound or a new screed to bring the floor true. We look at the levels before recommending either.

Is concrete grinding messy inside a house?

Grinding throws up fine dust containing silica, which is harmful to breathe, so we only grind with dust extraction attached and running. Rooms around the work are sheeted off and doorways sealed. Some dust still settles, but nothing like dry grinding. In an occupied Aldershot house we plan the work area and the route out before we start.

Do you grind floors ready for resin or polished concrete?

We grind slabs as preparation, so a resin floor laid by another firm has a clean, sound surface to bond to. Laying resin and polishing concrete are outside our work. If the next layer is ours instead, such as latex screed over the ground slab or a levelling compound, we prepare and finish the floor as one job.

Does a new build floor at Wellesley need grinding before new flooring?

Not always. A new screed that is clean, sound and flat may need nothing more than a check, but ridges at bay joints, trowel marks or a weak top skin are ground off before levelling compound or adhesive goes on. A calcium sulphate screed always has its laitance removed first. We look at the floor before suggesting any grinding.

Free, no-obligation quote

A fixed price for your Aldershot floor