Preparing shop floors at The Meadows for refits
When a unit at The Meadows changes tenant, the floor has to suit whatever the new shop lays. The old finish usually leaves something behind: adhesive under vinyl, tile bedding, sealer or floor paint, and fixings from display stands. A diamond grinder removes those in shallow passes and exposes clean concrete or screed ready for priming.
It also deals with high spots. Ridges, trowel marks and lips between bays look minor but telegraph through sheet flooring and make large tiles rock. Grinding takes them off locally, so any compound laid afterwards can stay thin; see levelling with compound for that next stage.
Over the Surrey border, the small units of Yorktown Industrial Estate were first built in the 1960s, and some have since been redeveloped. A unit being turned into a trade counter or workshop office may carry years of paint and oil on its slab. Grinding cuts through that, though very large areas or thick coatings can be faster to shot blast; our floor preparation service covers that alternative.
We do the grinding ourselves as a screeding contractor. We do not sell or hire grinders or diamond tooling, and we do not lay resin or polished concrete, but a ground slab is a sound starting point for a resin specialist. The surface is left clean and free of loose dust for whoever follows.
Grinding extension joins in Owlsmoor and College Town
Detached houses make up 42% of Sandhurst's homes, and the 1970s and 1980s houses of Owlsmoor and College Town commonly gain extensions at the side or rear. Where the new slab meets the old floor, a small lip at the opening is common. Grinding the high side down by a few millimetres, then feathering compound over the join, lets the new floor finish run through without a ramp.
Lifted carpets and vinyl leave their own residue. Older adhesives can be hard and patchy, and a new adhesive laid over them may not bond. Grinding returns the slab to clean material. Garages being converted benefit too, with oil and paint removed before a membrane and screed go on.
Grinding has limits, and we explain them plainly. It takes off local peaks but cannot level a floor that falls across a room; that needs compound or a new screed once the peaks are gone. Over-grinding can thin a screed below its minimum depth, so we measure as we go.
Silica dust is the safety issue. Concrete, screed and tiles release respirable crystalline silica when cut, so our grinders always run with extraction attached and doors to the rest of the house are sealed. For neighbouring Crowthorne, see floor grinding in Crowthorne.
How we price floor grinding in Sandhurst
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Sandhurst
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Sandhurst
Sandhurst is about 14.5 miles south-south-west of our Slough base as the crow flies, with postcodes including GU47. The nearest towns to it are Yateley (0.8 miles), Crowthorne (1.6 miles), Camberley (2.6 miles) and Frimley (3.5 miles).
More on floor grinding, part of our screeding services.