Levelling for shop fit-outs at The Meadows
The Meadows is the large out-of-town retail development at Sandhurst, and whenever a unit there is refitted, the floor has to suit the new tenant's finish. A shop floor takes heavy footfall, trolleys and display fixtures, and sheet vinyl or large tiles laid over a poor base soon crack or show every ridge.
The measure is surface regularity under BS 8204, checked with a 2m straightedge. Under that edge, SR1 permits 3mm at most, SR2 5mm and SR3 10mm, and a lot of thin sheet flooring will only accept SR1. We check the existing floor against the class the fitter needs before pricing.
Most of the effort is preparation. Old adhesive, sealer and any loose material are removed, and damaged areas repaired. Priming follows, with a product picked for the base, since concrete, sand and cement and calcium sulphate all want a different one. The compound is poured next, normally somewhere between about 2mm and around 10mm, and runs out smooth. Choosing a fast drying product means a unit at The Meadows is not left waiting on its floor.
Just over the county line, Yorktown Industrial Estate is mostly small industrial units from the 1960s, some since redeveloped. A trade counter or office in one of those needs the same approach, and where the slab is badly worn, concrete floor repair or shot blasting and preparation comes first.
New flooring in Sandhurst's newer and older homes
Only 3% of Sandhurst's homes were built from 2015 onwards, and 7% since 2000 in total. Houses built since 2015 usually already have screeded floors, so when an owner changes the flooring, the job is levelling or repair rather than a new screed. A modern screed may be sound but still not flat enough for LVT or large tiles, and a thin coat of compound closes the gap.
In older houses the problem is more often a join. Where a rear or side extension meets the original house, a small step or slope can remain even after careful screeding. Compound feathered across the threshold lets one floor finish run straight through from room to room.
Compound has limits. Poured thick over a floor that is past saving, it is prone to cracking and parting from the base. When the screed sounds hollow, is cracked right through or sits more than about 10mm out, replace it; rescreeding in sand and cement shows what that involves. And on a solid base needing just a few millimetres, a latex screed may suit.
How we price floor levelling in Sandhurst
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Sandhurst
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Sandhurst
Sandhurst is about 14.5 miles south-south-west of our Slough base as the crow flies, with postcodes including GU47. The nearest towns to it are Yateley (0.8 miles), Crowthorne (1.6 miles), Camberley (2.6 miles) and Frimley (3.5 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.