Extension joins and garage slabs in Haslemere
Extending and converting houses is where grinding usually comes in. About 24% of Haslemere homes were built between 1973 and 1999, and a house of that age may be due an extension or a full ground floor refit. Each of those leaves concrete surfaces that need preparing before the next layer.
At an extension join, the new slab and the old floor rarely meet perfectly. A lip of a few millimetres is enough to show through LVT or rock a large tile. Diamond grinding cuts the high edge back in thin passes, and a feathered compound then hides whatever is left.
Garage slabs bring different marks: oil, old paint, tyre rubber and the rough edge of a former door threshold. Grinding takes the surface back to clean concrete so a membrane, insulation and screed, or a levelling compound, can go on with confidence. The layers for a converted garage are set out in our guide to garage floor screed.
Grinding is precise but limited. It removes local high spots, ridges and trowel marks. It cannot correct a floor that slopes from one wall to the other or sags in the middle, because removing that much would weaken the slab or leave a screed under its minimum depth. In that case we grind only the high spots and finish with compound across the whole floor or a new screed.
Clearing old adhesive safely in Haslemere homes
Lifting old flooring is where many refits meet trouble. Carpet leaves gripper strips and foam backing stuck to the slab, old vinyl leaves black or yellow adhesive, and some floors carry several coats of paint. None of those make a reliable base. Grinding strips them away to leave sound concrete or screed, which can then be primed for compound, adhesive or a thin latex layer over awkward bases.
Silica dust is the reason grinding must be done properly. Old tiles, screed and concrete all hold silica, so cutting into them gives off fine respirable crystalline silica that should not be breathed in. Every grinder we run is connected to an extraction unit, the work area is sealed off and neighbouring rooms are protected, whether the house is detached or part of a terrace.
Some things we leave to others. K & B does not sell or hire grinding machines or diamond tooling, and we do not lay resin or polished concrete, though we can prepare a floor for a resin specialist. Where a whole floor carries a thick coating, shot blasting or scarifying through our floor preparation service is often quicker. We cover Haslemere and the places around it, including Grayswood and Hindhead.
How we price floor grinding in Haslemere
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Haslemere
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Haslemere
Haslemere is about 30.8 miles south of our Slough base as the crow flies, with postcodes including GU27. The nearest towns to it are Godalming (7.9 miles), Farnham (9.6 miles), Aldershot (11.4 miles) and Petersfield (11.5 miles).
More on floor grinding, part of our screeding services.