Temple Farm Industrial Estate and Aviation Way unit floors
Temple Farm holds a combination of warehouse and light industrial units, and the Airport Business Park is right next to London Southend Airport. On estates like these, a change of tenant is a common reason for grinding. The outgoing business may have painted the floor, marked out walkways, glued down vinyl in an office corner or left a ridge where racking or a partition stood. The incoming one usually wants a clean slab for its own finish, fast.
Grinding is a cutting process. Diamond segments on spinning heads take thin layers off the concrete, so a raised bay joint or patch can be brought down to the surrounding floor and coatings stripped to bare material. The soft laitance on an old slab's surface comes off with it, leaving something primers and compounds can bond to.
How far we take it depends on the next layer. Carpet tiles or vinyl over a smoothing compound need a clean, sound surface; a new bonded screed needs a stronger key. Where a resin floor is planned, we prepare the slab to the resin maker's requirement and the resin contractor lays it. Neither resin nor polished concrete is laid by our team.
The planned Saxon Business Park will add new industrial and office floorspace, and any new slab can be left with lips and trowel marks that need taking down before finishes go on. For very large areas or heavy coatings, shot blasting or scarifying may be quicker; our floor preparation page covers both, and new full-depth floors fall under commercial screeding.
Glue, paint and extension joins in Southend-on-Sea houses
In homes, grinding is usually about what an old floor covering left behind. Lift carpet or sheet vinyl from a ground floor laid decades ago and you often find a stubborn adhesive layer. If it is soft or patchy, a grinder takes it back to clean concrete so a thin latex skim or new flooring can bond properly.
Extensions are the second reason. Semis built between the wars and in the 1950s are a big part of the city's housing and suit kitchen extensions, and where the new slab meets the old floor there is often a small step or ridge. Grinding removes the high edge; compound then carries the floor across in one plane. Painted garage floors being turned into rooms need the same stripping before insulation and screed.
The limits are worth knowing before you book. A grinder flattens local bumps, not a floor that falls across its whole width; that needs levelling compound across the room or a new screed once the high points are down. On a screed, cutting too deep can leave less than its minimum depth, so we check thickness first.
Dust needs managing in occupied homes and flats. Silica in concrete, screed and tiles turns into harmful dust under a grinder, so every machine runs with extraction and neighbouring rooms are sheeted and sealed. Wickford, about 10 miles off, has its own page on floor grinding in Wickford.
How we price floor grinding in Southend-on-Sea
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Southend-on-Sea
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Southend-on-Sea
Southend-on-Sea is about 58.5 miles east of our Slough base as the crow flies, with postcodes including SS1, SS3, SS0 and SS9. The nearest towns to it are Rochford (2.9 miles), Rayleigh (5.6 miles), South Woodham Ferrers (8.2 miles) and Wickford (9.6 miles).
More on floor grinding, part of our screeding services.