Where new slab meets old in Stanford-le-Hope
A floor grinder carries spinning diamond segments that pare the surface down a fraction at a time. It is a surface tool. Bumps, the ridge left where two bays met, trowel lines, laitance, leftover glue, paint and light coatings all come off, and it leaves a clean, slightly open surface that compound, screed or adhesive can grip.
A typical domestic case in Stanford-le-Hope is the join between a new extension and the original house. On post-war semis and terraces, the extension floor has to finish at the height of the older concrete slab. Even with careful setting out, a lip of a few millimetres can remain along the old wall line or across the doorway, and a strip of LVT or a row of tiles laid across it will show it. Grinding takes that lip down so the two floors meet cleanly.
The other common case is an older floor once carpet or vinyl has been lifted. Decades of adhesive, paint splashes and patch repairs sit on the surface, and new compound will not bond reliably over them. A grinder strips them back to sound concrete.
There is a limit, though. Grinding deals with local high spots; a floor that falls away or sags over a whole room is beyond it, because cutting everything down to the lowest point is neither practical nor safe. On those floors we grind the high spots, then bring the rest up with levelling compound laid after grinding or a new screed. Over-grinding a screed can also take it below the depth it needs, so every pass is measured.
Dust control and larger floors off the A13
Grinding concrete, screed or old tiles throws up fine silica dust, and breathing it in is harmful. So an extraction unit is connected to the machine whenever we grind. In a house we also sheet off doorways, keep other rooms closed and agree with you where the extractor and power leads will run.
Warehouse floors are a far larger scale of job. Buildings at the DP World logistics park run from 100,000 to 1.6 million sq ft, and floors that size have to be flat and hard-wearing. On large areas or where a thick coating has to come off, grinding is often paired with or replaced by shot blasting or scarifying, both covered under floor preparation and shot blasting. Damaged or broken concrete is a separate repair, set out on our concrete floor repair service page.
To be clear about what we offer: grinding is preparation carried out by our own crew. Grinders and diamond tooling are not something we sell or hire out, and resin or polished concrete finishes are outside our work. If a resin system is going down afterwards, we can prepare the slab to the surface the resin installer asks for, and they take it from there.
How we price floor grinding in Stanford-le-Hope
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Stanford-le-Hope
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Stanford-le-Hope
Stanford-le-Hope is about 47.2 miles east of our Slough base as the crow flies, with postcodes including SS17. The nearest towns to it are Basildon (3.1 miles), Tilbury (5.7 miles), Grays (6.2 miles) and Gravesend (6.7 miles).
More on floor grinding, part of our screeding services.
