Relaying failed solid floors in older Stanford-le-Hope homes
Only 5% of homes in Stanford-le-Hope were built before 1919, and terraced houses make up 28% of the stock. Older houses are where floors without insulation or a reliable damp proof membrane are most likely. Where settlement or lost damp protection has gone beyond a surface problem, the floor itself has to be rebuilt. Laying new flooring over it would only move the problem up a layer.
When a solid floor like that has failed, covering it only hides the problem. What lasts is digging it out, laying a fresh base, adding insulation plus a membrane, then topping it with screed. Sand and cement suits that job for three reasons. We batch it at the house, which lets every room have its own depth. It can be laid in small, oddly shaped rooms without a pump on the street. It also stands up to water in bathrooms, which calcium sulphate will not.
Floating on insulation, a domestic layer goes in at roughly 65mm. Bond it straight onto good concrete instead and it can come down to 25 to 40mm, handy when a low ceiling or a doorway leaves little room. Either way, the crew tamps it down by hand and brings the top up smooth with a float. If the base needs grinding or cleaning first, our floor preparation work covers it, and the thinner option is explained under bonded screed.
Wet rooms, garages and drying times in Stanford-le-Hope
A wet room or bathroom floor needs a slope, so water heads for the outlet. We form that slope with the trowel while laying, something a pourable self-levelling mix will never hold. It also tolerates the occasional soaking far better than calcium sulphate, so it is the natural base under a tanked, tiled shower floor.
Converting a garage is another job it handles well. The garage base normally sits a step lower than the house, and the new screed fills that step while housing insulation too. The layers involved are set out in screeding a garage floor. Fibres mixed in help resist cracking, adding between £1 and £3 per m² on published rates.
The trade-off is time. Hand-laid screed gives up its water at roughly a day for each millimetre to 40mm, slowing beyond that, so 65mm of it means a long wait before any finish that dislikes moisture. Additives that speed drying cut the wait, and they are explained under faster drying screed mixes. Going by 2026 published rates, a standard mix costs between £18 and £25 per m², and a fast drying one between £20 and £28.
On a small job such as a single bathroom or a garage, there is no pump to arrange, so access is rarely a problem.
Sand and Cement Screed prices in Stanford-le-Hope
Sand and cement screed: £18 to £25 per m² supplied and laid (MyJobQuote, August 2026), so £450 to £630 for 25 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your sand and cement screed in Stanford-le-Hope
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Sand and Cement Screed from Slough to Stanford-le-Hope
Stanford-le-Hope is about 47.2 miles east of our Slough base as the crow flies, with postcodes including SS17. The nearest towns to it are Basildon (3.1 miles), Tilbury (5.7 miles), Grays (6.2 miles) and Gravesend (6.7 miles).
More on sand & cement screed, part of our screeding services.
