info@kandbscreeding.co.uk

Liquid Screed · Hertfordshire

Liquid Screed in Welwyn Garden City

We pump liquid screed into homes across Welwyn Garden City, laying a full extension or ground floor in one visit, and the surface can be walked on within 24 to 48 hours. What makes this relevant locally is that a quarter of homes in the town, 25%, are flats. That means a lot of upper floors, where a hose running up the stairwell is far quicker and cleaner than carrying sand and cement in by the bag.

Where pumped screed pays off in Welwyn Garden City

The pump earns its keep on broad floors without many walls or steps in the way. Rear extensions and kitchen knock-throughs, which are common across the town, give exactly that kind of space, often with one long run of floor from the old house into the new room. One pour reaches every corner, the surface comes up to SR1 or SR2 without much trouble, and so little shrinkage means fewer joints, by a wide margin, than a hand-laid floor.

Depth is the other advantage. In a house, liquid screed floating on insulation can be about 35mm thick; sand and cement needs about 65mm. On an extension that has to line up with the floor of the original house, that difference in depth can decide whether the levels work without raising thresholds.

The Wheat Quarter, with approval for 1,454 units, mainly homes, points the same way on a bigger scale. Large new residential schemes are usually designed around a flowing screed over insulation, often with heating pipes clipped down before the pour.

Two types are made: one bound with calcium sulphate, one with cement. The choice turns on whether the floor might see water and how quickly the flooring is due. For the calcium sulphate type in depth, see anhydrite and calcium sulphate screed; to weigh pumped against hand-laid, read liquid or sand and cement: a comparison.

Getting the hose into Welwyn Garden City homes

We set the mixer and pump up outside and lay a hose in through whichever door is closest to the room. It can travel along a hallway, round corners and up a staircase to a flat, provided the route is clear and protected. If the only place to park is a restricted bay or a shared service road, tell us when you ask for a price so the set-up can be planned. For a fuller picture of the set-up, see how our screed pumping works.

On pour day the room should already have edge strip along each wall, insulation covered by a membrane taped at every seam, and open doorways dammed. We go over all of it before starting; one gap in the membrane and screed can leak out or stick to what it should float above.

A floor you can walk across after a day or two is still wet inside, so the covering waits until a moisture test shows the screed is within the flooring manufacturer's limit. Our drying time guide works on about one day for each millimetre up to 40mm deep, and more beyond it.

Liquid Screed prices in Welwyn Garden City

Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.

Who lays your liquid screed in Welwyn Garden City

Finished screed with the edge membrane trimmed ready for flooring
Finished screed with the edge membrane trimmed ready for flooring.

K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.

See what customers say in our Google reviews and on our testimonials page.

Liquid Screed from Slough to Welwyn Garden City

On the map, Welwyn Garden City sits north-east of Slough, about 26.6 miles from our base in a straight line (postcodes including AL8, AL6, AL7 and AL9), next to Hatfield (2.7 miles), Hertford (5.6 miles), Harpenden (6.5 miles) and St Albans (6.7 miles).

More on liquid screed, part of our screeding services.

FAQs

Liquid Screed in Welwyn Garden City: your questions

How much does liquid screed cost per m² in Welwyn Garden City?

For a plain liquid screed, UK rates published for 2026 sit between £24 and £31 per m². Over heating pipes, the published range is wider, £20 to £35 per m². Your own figure turns on the floor area, its depth, how easily the pump reaches the house and whether we are supplying insulation and membrane. A fixed quote follows in writing, inside 24 hours.

Can liquid screed be pumped up to a first floor flat in Welwyn Garden City?

Yes. From the pump at street level, the hose goes in at the block entrance and climbs the stairs or follows the landing to your door. We need to know about the route, any communal areas that need protecting and where the mixer can stand. Upper floors in blocks often have acoustic layers or specific build-ups, so share the specification with us first.

How thin can liquid screed be laid over insulation?

On insulation, the minimum is about 35mm in a house and about 40mm in a commercial building. With heating pipes in the floor, keep 25mm or more above them, which tends to bring the total to 45 to 50mm. Going thinner than the product allows risks cracking, so the depth is set before we price the job.

Nearby

Liquid Screed near Welwyn Garden City

Free, no-obligation quote

A fixed price for your Welwyn Garden City floor