Warehouse and office slabs at Elms Farm and Priory
When a unit at Caxton Park, or one of the larger warehouses on Hammond Road, changes hands, the floor can carry the last tenant's history: painted walkway lines, glue from carpet tiles in the old office corner, a thin coating worn through in the traffic lanes, and a surface that has dusted and roughened over the years. A new occupier's compound, screed or flooring will only hold as well as the surface it is laid on.
Grinding takes that surface back. Spinning diamond segments shave the slab down a fraction at a time, removing paint, adhesive residue, thin coatings and the weak, powdery laitance that sits on many slabs. They also take down local high spots, trowel marks and the lips that form where one bay of concrete meets the next, which otherwise show through vinyl or jolt a pallet truck.
An office refit at Priory Business Park can call for the same treatment on a smaller scale. Under old carpet tiles there is often a film of tackifier or adhesive that a new finish cannot sit on, and grinding clears it.
What grinding leaves is a prepared floor, not a finished one. Compound, a new screed or the occupier's flooring contractor follows. Resin systems are laid by specialists after us; resin and polished concrete are outside what we offer. Where the slab is cracked or spalled, repairing the concrete comes before the grinder, and for a whole unit fit-out see screeding for commercial units.
Extensions, garages and lifted carpet in Bedford homes
Grinding is not only for warehouses. In a house it tends to come up in three places.
The first is where an extension meets the original floor. Bedford's suburban semis often gain an extension, and the new slab rarely lands exactly level with the old one. A ridge of a few millimetres at the opening can be ground down, and smoothing compound across the join then finishes the job.
The second is the garage. Before a conversion, the old slab may carry oil stains, paint or a sealer, and grinding opens the surface so the new membrane or screed has something sound beneath it.
The third is a room where carpet or vinyl has just been lifted. Homes built between 1973 and 1999 make up 23% of Bedford's housing, and floors of that age can carry old adhesive that has to go before a new finish or a latex smoothing layer.
Grinding has limits. It lowers high spots, but a floor that falls or sags from one side of the room to the other still needs levelling or a new screed once those spots are gone. Cutting a screed too hard can also leave it thinner than its minimum depth, so we check its thickness before we start.
How we price floor grinding in Bedford
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Bedford
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Bedford
Bedford is about 42.5 miles north of our Slough base as the crow flies, with postcodes including MK40, MK41 and MK42. The nearest towns to it are Kempston (2 miles), Sandy (7.7 miles), Flitwick (9.3 miles) and Biggleswade (9.4 miles).
More on floor grinding, part of our screeding services.
