Preparing production floors on Bayton Road, Exhall
Factory floors take punishment that house floors never see. Forklift traffic, pallets dragged across the slab, spilled oil and years of line markings leave a surface that looks solid but will not accept anything new on top. Floors that take that kind of heavy use are where grinding, repair and tougher toppings earn their place.
The grinder works by spinning diamond segments against the concrete and cutting away a fine layer with each pass. It strips paint and thin coatings, scours off contamination, and takes down ridges at construction joints and lips where earlier repairs were left proud. The result is a sound, open surface that a primer can bite into.
That matters because a topping is only as good as its bond. A high strength screed laid on paint or a dusty skin will part company with the slab under wheels, however good the mix. Grinding removes that weak layer first. If a coating is thick, or the area very large, shot blasting may be faster, and either method sits within our floor preparation service.
What grinding will not do is change the overall level of a production hall. It cuts millimetres, so a floor that dips across a bay still needs a topping or screed once the high points are ground. Cracked and spalled areas are a separate problem, handled as concrete floor repair before any surface work starts.
Bedworth homes, town centre offices and silica dust
Grinding is not only for factories. Retail and office fit outs in the pedestrianised centre are another setting. An office floor stripped of carpet tiles can carry a crust of adhesive that must come off before new flooring goes down.
At home, the cases are smaller. When a rear extension slab meets the original floor of a semi, a raised lip can form along the old wall line, and grinding it down saves building the whole floor up. A garage turned into a gym or workshop may need oil and paint ground away. An old kitchen with dark adhesive left from lifted tiles can be ground back to clean concrete before a thin coat, as described on our Bedworth latex screed page.
Dust control is not optional. Concrete, screed and ceramic tiles contain silica, and grinding produces respirable crystalline silica that damages lungs. Our grinders run only with extraction attached, adjoining rooms are sheeted off, and the floor is vacuumed when we finish.
To be clear about scope, we prepare floors. Resin and polished concrete are left to specialists, and none of our grinders or tooling is sold or hired out. Grinding work in Coventry follows the same rules.
How we price floor grinding in Bedworth
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Bedworth
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Bedworth
Bedworth is about 74.3 miles north-north-west of our Slough base as the crow flies, with postcodes including CV12 and CV7. The nearest towns to it are Nuneaton (3 miles), Coventry (5.1 miles), Hinckley (6 miles) and Earl Shilton (9.4 miles).
More on floor grinding, part of our screeding services.
