Grinding older unit floors at Mount Farm and Denbigh
Mount Farm and Denbigh took in relocated London firms after the war, Marshall Amplification among them, and they are still Bletchley's industrial areas. A factory or warehouse floor of that age may have carried years of vehicles, racking and spills. Its surface may be painted with line markings, sealed, patched with mismatched materials or stained with oil, and none of that gives a new topping or adhesive a reliable bond.
Grinding opens it up again. The machine runs rotating diamond segments across the slab, taking the surface off in very thin passes. Paint, thin coatings, laitance and ridges come away, leaving bare, sound concrete that will accept a primer. Whether the plan is a new floor finish, a coating by a specialist or a new topping after concrete repair, grinding is the first step.
Shot blasting or scarifying can be quicker for thick coatings and very large areas, and both sit within our floor preparation work; once we have looked at the floor, we suggest whichever suits it.
Silica dust is why grinding is planned with care. Concrete and screed contain crystalline silica, and cutting them releases particles fine enough to reach deep into the lungs. Our grinders run only with extraction attached, and we screen off offices, stock and neighbouring bays before starting, so part of a unit may keep working while another part is ground. We are contractors rather than a hire shop, and we do not sell or rent grinding equipment.
Extensions and lifted floors in Bletchley homes
Grinding is not only for industrial units. Extensions and knock-throughs on the overspill-era houses and the 1970s to 1990s estates can leave a new slab finishing slightly above the old floor. That step catches the edge of a tile or shows through LVT; grinding takes the lip down so a thin compound can blend the two.
Lifting old flooring is the other usual reason. Pull up decades-old vinyl or carpet and the concrete beneath can be coated in black adhesive or patchy glue. A grinder clears it back to clean concrete so a latex screed for vinyl or LVT or a new adhesive can bond.
There is a limit to what grinding can fix. It removes local high spots and ridges, but a floor that slopes or has dropped across the room cannot be ground flat: far too much would have to be cut away, and a screed taken below its minimum depth loses strength. A tired concrete floor that has cracked or sunk needs relaying instead, which the Bletchley sand and cement screed page explains. Where only part of the floor sits high, we grind the peaks and level the rest.
Resin and polished concrete are outside our work. If either is your chosen finish, we can grind the slab and leave it ready for that specialist.
How we price floor grinding in Bletchley
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Bletchley
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Bletchley
Bletchley is about 32.1 miles north of our Slough base as the crow flies, with postcodes including MK3, MK1, MK17 and MK2. The nearest towns to it are Milton Keynes (3.5 miles), Leighton Buzzard (6.2 miles), Newport Pagnell (6.5 miles) and Flitwick (10.4 miles).
More on floor grinding, part of our screeding services.
