Levelling for refits at Maylands, Riverside and The Forum
When a unit changes hands, the new floor finish usually demands a flatter base than the old one did. LVT and thin sheet vinyl show up every ridge, and many of them need SR1, a gap of 3mm at most beneath a 2m straightedge. SR2 allows 5mm and SR3 allows 10mm, which is fine for carpet but not for a polished retail floor.
Maylands Business Park is Hemel Hempstead's main commercial area, with warehouses and production units. In the town centre, the Riverside shopping complex and The Forum bring retail and civic fit-out work. For a unit or shop floor, levelling compound is laid at about 2mm up to around 10mm, and fast drying products let the flooring follow within a short programme.
Whether the compound stays bonded comes down to the preparation. The base is cleaned, any loose screed is cut out and the surface is primed with the product that matches it, which differs for cement, calcium sulphate, concrete and some existing floors. On a warehouse slab with contamination or a weak surface, concrete floor grinding may come first.
There is an honest limit to compound. Used thick over a floor that is really due for rescreeding, compound is liable to crack and come away. When a dip is too deep for compound, we tell you, and the quote becomes a fresh sand and cement screed.
Joining old and new floors in Hemel Hempstead houses
At home, levelling is mostly about joins. A new extension floor rarely meets the old one exactly, and houses from the new town phases and the 1970s districts such as Grovehill often have slight dips and ridges after decades of use. Homes from 1973 to 1999 make up 25% of the stock, and a kitchen knocked through into an extension in one of them leaves exactly this kind of join.
The fix is to prime both surfaces with the right products, then pour a compound across the whole area so the step disappears and the new flooring runs through in one piece. The work is fast: many compounds take foot traffic within hours, and flooring can go down soon after, depending on product and depth.
Thin layers of a few millimetres over a sound base are the domain of latex screed and similar compounds. If the floor is soft, cracked or hollow in places, it needs repair before anything goes on top. Owners comparing prices can also ask about floor levelling in Chesham.
How we price floor levelling in Hemel Hempstead
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Hemel Hempstead
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Hemel Hempstead
Hemel Hempstead is about 17 miles north-north-east of our Slough base as the crow flies, with postcodes including HP1, HP2 and HP3. The nearest towns to it are Berkhamsted (4.5 miles), St Albans (5.7 miles), Harpenden (6.6 miles) and Chesham (6.9 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.