Unit floors on Horndean's estates by the A3(M)
When a unit changes hands, the incoming tenant inherits whatever the last one left on the floor. That might be a painted warehouse slab, stripes of old glue where carpet tiles were pulled up, or a raised edge where two bays of concrete were poured at different heights. Nothing new bonds properly to any of it.
Grinding cuts the surface away in thin passes. Rotating diamond heads take off the top of the slab, removing paint, thin coatings, trowel marks and the weak laitance skin, and they knock down local humps and the lips at joints. What remains is open, clean concrete that compound, screed or adhesive can grip.
On the Horndean estates, Hazleton Interchange among them, the next layer depends on the new use. Turning a unit into an office with carpet tiles or vinyl usually means grinding and then a skim of compound. A workshop may need a fresh topping. Resin is sometimes specified; we prepare the slab for the resin installer, but resin and polished concrete are not things we lay.
Be clear about what grinding cannot do. It deals with local high spots. A floor that slopes or dips across a wide area stays that way, because taking enough off to flatten it would cut far too deep. The plan then is to grind the peaks and correct the rest with self levelling compound for Horndean floors or a new screed. Over-grinding a screed can also leave it below its minimum depth, so we measure before starting.
For very large areas or thick coatings, shot blasting or scarifying may suit better; both sit within our floor preparation service.
Extensions, garages and lifted carpet in Horndean houses
Extensions and garage conversions are common on the Hazleton estate and among Horndean's other 1960s and 1970s housing. Each one leaves a join between a new slab and an old one, and the two rarely finish at exactly the same height. Where the difference is small, grinding takes the proud edge down and a thin coat of compound blends what is left.
Old floors give up surprises when coverings come up. Lift a carpet, vinyl or cork floor in a Horndean hall or kitchen and the concrete beneath may carry old adhesive or patchy old compound. Grinding takes those residues back to clean concrete, so the next primer, compound or adhesive goes onto a sound surface.
Dust is the real hazard. Concrete, screed and tile all contain silica, and grinding them releases respirable crystalline silica dust, which is harmful to breathe. We grind only with extraction connected to the machine, and we seal doorways and protect the rooms next to the work, which counts in a house the family is still using.
We are a contractor, not a hire shop, so grinders and diamond tooling are neither sold nor hired out. Once the floor is clean and true, latex screed over awkward bases or a new finish can follow, and we offer grinding in nearby Fareham too.
How we price floor grinding in Horndean
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Horndean
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Horndean
As the crow flies, our yard in Slough is about 45.9 miles from Horndean, which lies to the south-south-west. Postcodes here include PO8, and Havant (3.7 miles), Emsworth (5.2 miles), Petersfield (7.3 miles) and Fareham (8.3 miles) are close by.
More on floor grinding, part of our screeding services.