Leatherhead floors that suit a pumped screed
The strongest candidates are big, uninterrupted areas. A full-width rear extension, a knocked-through kitchen and dining room, or a whole floor of a new flat can be poured in one visit, and the result has far fewer joints than a hand-laid floor of the same size because liquid screed shrinks very little.
Homes built since 2015 make up 17% of the town's total, and modern build-ups of this kind often combine insulation, sometimes heating pipes, and a flowing screed on top. Poured liquid closes around each pipe without leaving air pockets, so warmth spreads evenly and the room heats up sooner. If your new room is heated, the underfloor heating screed in Leatherhead page covers pipe cover and switch-on timing.
Depth matters more than people expect. Laid as a floating floor on insulation, a home needs about 35mm of liquid screed as a minimum, and an office or shop about 40mm. Pour less and the floor can crack under load. The surface regularity is just as important: SR1 or SR2 is readily achievable, which suits tiles, LVT and engineered wood.
You can choose a calcium sulphate mix or a cement based one; which is right comes down to the room and what will be laid over it. Our side-by-side look at pumped and hand-laid screed weighs the two up properly. Small, chopped-up rooms and floors laid to falls are often better done by hand.
Pump access in the centre and in Leatherhead blocks
The pump and mixer stay outside, and everything depends on how far and how easily the hose can travel. A driveway in front of a house is ideal. A long run down a side passage is fine if it is clear.
Town centre addresses take more planning. The 1980s redevelopment left pedestrianised streets around the Swan Centre, and where vehicles cannot pull up outside, the pump has to stand further away with a longer hose run, or the pour has to be timed around access rules. The kit itself is described on our screed pumping service page, though our pumps only work on our own pours and are not hired out.
Upper floors in blocks need a protected route through communal areas, and sometimes the neighbours or managing agent need notice. Tell us the floor level and building layout when you ask for a price.
For a day or two after the pour, shut the doors and windows and stop draughts getting at the floor. People can then walk on it lightly, yet nothing should be laid until the screed passes a moisture test. Reckon on one day of drying per millimetre over the first 40mm. In neighbouring Epsom, see liquid screed for Epsom homes.
Liquid Screed prices in Leatherhead
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Leatherhead
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Leatherhead
Leatherhead is about 21.2 miles south-east of our Slough base as the crow flies, with postcodes including KT22 and KT21. The nearest towns to it are Epsom (3.8 miles), Dorking (4.4 miles), Ewell (5.1 miles) and Reigate (6.8 miles).
More on liquid screed, part of our screeding services.
