Latex for refits in Poulner and around Ringwood
Poulner and the suburbs around Ringwood's centre, mostly built after 1945, are where much of the town's domestic floor work happens, and a kitchen, bathroom or utility refit strips each room back to whatever lies underneath. That varies from room to room: ceramic tiles from an earlier refit, an old quarry tiled floor, a concrete slab worn into shallow dips, or boards upstairs.
Latex handles most of these when the base is firm. Tiles are tapped over, and any that are hollow or loose are lifted and the holes filled. Grease and polish are scrubbed off, then a primer suited to tiles goes on. Hard, thin adhesive residue can usually be primed over; soft or crumbling residue is scraped or ground away. Concrete is cleaned, with loose patches cut out.
Timber has a rule of its own. Latex never goes directly onto floorboards, which move with temperature and humidity and crack a thin layer along each board edge. Boards are screwed down, then overboarded with flooring grade plywood fixed at close centres, and the compound is spread over the ply.
Detached homes are 35% of Ringwood's housing, and a larger ground floor means one refit can take in a kitchen, utility and cloakroom with a different base in each. Latex lets all of them finish at one smooth face for a continuous run of vinyl or LVT. Where an extension has left a real step rather than a few millimetres of unevenness, floor levelling compound or a screed is the right tool, not latex.
Damp floors near the Ringwood Market Place
Around the Market Place, some older cottages and town houses may sit on solid floors without a damp proof membrane, which changes the plan entirely. Latex sitting on a damp slab cannot hold back rising moisture, and a sealed finish such as vinyl or LVT traps it, so the adhesive softens and the floor lifts. We check for damp before pricing. Where it is present, the dependable fix is a dig-out followed by insulation, a membrane and a traditional sand and cement screed, after which latex can smooth the new surface if the finish calls for it.
Two further situations rule latex out. A suspended floor that flexes when walked on will crack the compound, so boards and joists are fixed first. A floor that is well out of level is beyond a coat a few millimetres thick and needs repair or a screed.
Calcium sulphate screed, found in some newer homes and flats, always needs its laitance sanded off and a compatible primer before latex. Cracked or hollow sections of an older screed are dealt with through screed repairs first. Nearby, we also lay latex screed in Verwood.
How we price latex screed in Ringwood
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who lays your latex screed in Ringwood
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Latex Screed from Slough to Ringwood
On the map, Ringwood sits south-west of Slough, about 68.7 miles from our base in a straight line (postcodes including BH24), next to Verwood (4.6 miles), Ferndown (5.3 miles), Christchurch (7.5 miles) and New Milton (8.8 miles).
More on latex screed, part of our screeding services.
