info@kandbscreeding.co.uk

Liquid Screed · Northamptonshire

Liquid Screed in Rushden

We pump liquid screed in Rushden for extensions, open plan rooms and flats. Once in, it finds its own level, wraps around any pipes and will normally bear foot traffic after 24 to 48 hours. Rushden has plenty of mid-century semis, which tend to need a new slab for a rear extension. A wide extension floor is quick to pour in one visit, and it comes out flatter than most hand-laid floors of the same size.

Extensions and flats that suit liquid screed in Rushden

Liquid screed pays for itself on area. A kitchen extension that runs the width of a semi, a knocked-through ground floor or a floor of flats can be poured in a few hours, where a hand-laid screed would take days. It flows around corners and pipes, finds its own level and cures dense and flat, with surface regularity of SR1 or SR2 readily achievable.

Mid-century semis in Rushden are common candidates for that kind of extension. The new floor usually sits on insulation over the slab, with a membrane and an edge strip, and the liquid screed floats on top at about 35mm upward in a home.

The other natural match in Rushden is a flat. In Rushden, 12% of homes are flats, and upper floor apartments are well suited to a pumped screed because the hose can climb a stairwell instead of anyone carrying bags. Homes built since 2015 make up only 6% of the stock, so new build plots are a smaller part of the picture here than refurbishment and extension.

Liquid screed comes as either a calcium sulphate mix or a cement based one. Which one to use depends on the rooms, whether any will get wet and the programme. Calcium sulphate grades are covered on our anhydrite flow screed page, and for depth rules see the screed thickness guide.

Pumping to terraced streets and upper floors in Rushden

Mixer and pump never come inside; what matters is the length of hose between them and your room. On a Rushden cul de sac with a driveway, the kit parks next to the house. Close to the centre, where houses are terraced, the truck may have to wait in the road while the hose goes in at the front door and down the hallway to the back room.

We plan that route when we price. Useful details are whether there are parking restrictions, whether the house shares an entry with next door, and whether the pour is on an upper floor. A long hose run is fine; a surprise on the day is not.

Once poured, the screed is left to settle out of draughts for a day or two, then ventilated to dry. Expect around a day of drying per millimetre over the first 40mm, with progress slowing beyond it. The pour itself can be walked on long before it is ready for flooring, so book the fitter after a moisture test rather than by the calendar.

For a heavier pumping job, such as feeding another contractor's pour, see our screed pumping service. Near neighbours can read about liquid screed in Wellingborough.

Liquid Screed prices in Rushden

Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.

Who lays your liquid screed in Rushden

Bright smooth liquid screed across a large room
Bright smooth liquid screed across a large room.

K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.

See what customers say in our Google reviews and on our testimonials page.

Liquid Screed from Slough to Rushden

As the crow flies, our yard in Slough is about 52.5 miles from Rushden, which lies to the north. Postcodes here include NN10, and Wellingborough (4.1 miles), Raunds (4.6 miles), Burton Latimer (6 miles) and Kettering (9.3 miles) are close by.

More on liquid screed, part of our screeding services.

FAQs

Liquid Screed in Rushden: your questions

How thick is liquid screed in a Rushden extension?

In a home, floating over insulation, liquid screed begins at about 35mm; a commercial floor begins at about 40mm. Where heating pipes run underneath, they want 25mm or more on top, so the whole layer is normally 45 to 50mm. The exact figure comes from your drawings, or from the finished floor height the screed has to match.

Can liquid screed be pumped to a first floor flat?

Yes. We feed the hose up the stairwell or in through a window, so nobody carries screed upstairs. The floor needs a suitable base, insulation where specified and an edge strip in place. Tell us the floor level and access route when you ask for a Rushden price.

Does liquid screed crack?

It barely shrinks, so a pumped floor gets by with a fraction of the joints sand and cement would need, and cracks less often. Problems usually come from the build-up, such as missing edge strip, loose insulation or heating switched on too fast. We check those before the pour, and give the drying and heat-up advice in writing.

Nearby

Liquid Screed near Rushden

Free, no-obligation quote

A fixed price for your Rushden floor