Levelling shop floors at the Elmsleigh Shopping Centre
A new tenant in a shop unit usually means lifting the previous flooring, and what lies under it is seldom fit for the next finish. Glue residue, patch repairs and worn areas show straight through vinyl, LVT or large format tiles. In a shopping centre such as Elmsleigh, opened in 1980, or Two Rivers, opened in 2002 on the old Hale Mill linoleum works, the fit-out window is short, so the levelling has to be planned around trading.
BS 8204 sets three classes, checked with a 2m straightedge: a gap of up to 3mm meets SR1, 5mm meets SR2 and 10mm meets SR3. Thin sheet flooring in a retail unit frequently has to meet SR1.
Most compound is poured somewhere from 2mm to roughly 10mm thick, and particular products allow more. Before it goes down, we clean the base and prime it for whatever it is made of, whether concrete, calcium sulphate, sand and cement or traces of old adhesive. A mismatched primer is one of the usual reasons compound comes loose.
Because fast drying compounds are used, a shop refit stays on schedule and the floor layer can frequently start the next day. Where an earlier start is needed after a full screed, a quick drying screed is the alternative, and badly worn bases go through floor preparation before any compound is poured. Office floors can be phased zone by zone, so each area is empty and closed only while it cures.
Smoothing old and new floors in Staines-upon-Thames homes
At home, levelling usually solves a join. A rear extension on an inter-war or post-war semi has a new, flat floor, while the original floor beside it has settled or was never quite level. Where they meet, a lip or slope appears, and thin flooring shows it. Compound evens out the join and fills the shallow hollows, letting the new flooring pass from old room to new without a bump.
There are limits. It only smooths; it does not add strength, and pouring it thick over a floor that should be replaced ends in cracking and loss of bond. A floor that sounds hollow, is falling apart or sits beyond what compound can correct needs rescreeding, and hand-laid screed in Staines-upon-Thames covers that. When the base is sound but there is barely any height to spare, latex screed a few millimetres thick may suit.
We look at the floor first and say plainly which of the two it needs. Levelling is also far quicker on the programme, so the flooring fitter is not left waiting weeks.
How we price floor levelling in Staines-upon-Thames
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Staines-upon-Thames
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Staines-upon-Thames
Staines-upon-Thames is about 8.9 miles south-east of our Slough base as the crow flies, with postcodes including TW18. The nearest towns to it are Egham (1.6 miles), Ashford (2.2 miles), Chertsey (2.9 miles) and Sunbury-on-Thames (4.2 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
