Stripping Canary Wharf and Whitechapel refit floors
A grinder cuts the top of a floor away in thin layers using rotating diamond heads. On an office refit that means lifting carpet tile adhesive, vinyl glue, old paint and the odd thin coating, along with the trowel marks and lips between bays that would show under new vinyl or LVT. The result is a clean, open surface that takes primer, levelling compound or a new screed properly.
Canary Wharf's offices are refitted regularly, and that work can take place inside occupied buildings with fixed access hours, service lifts and neighbours on the floors above and below. That shapes how grinding is done. Machines run only with dust extraction, the work area is sealed off, and debris leaves by the agreed route.
Whitechapel's shops and markets are smaller jobs, but a unit that has been refitted more than once can carry several layers of residue.
Depth needs care in towers. Apartment and office floors are often floating screeds laid to a set thickness over acoustic insulation, and grinding too deep into one can take it below its minimum depth. We confirm the build-up and grind only what the finish needs.
Where a coating is thick or the area very large, shot blasting or scarifying through our floor preparation service may be quicker. After grinding, levelling compound for Tower Hamlets refits can bring the floor to the flatness the finish asks for.
Fish Island warehouses and older Tower Hamlets floors
Fish Island, by the Olympic Park, has turned from industrial warehouses into artists' studios and new flats, and part of it is a conservation area. Converted warehouse floors can carry decades of paint, sealers and spills. Grinding takes that back to sound concrete so the new use starts on a clean slab.
A converted space may be destined for a resin or polished concrete finish. We lay neither. Our part is the preparation: grinding, repairs and any levelling, leaving a surface a resin contractor can work on.
In homes, grinding is more targeted. Lifting old vinyl or carpet in a post-war estate flat can leave adhesive that has to come off before a thin latex screed in a Tower Hamlets flat or new flooring will bond.
Grinding cannot cure a floor that slopes. It removes high spots; it does not raise low ones, so a floor that dips across a room is ground and then levelled or screeded.
We are a contractor, not a hire shop, and none of our grinders or diamond tooling is sold or hired out.
How we price floor grinding in Tower Hamlets
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Tower Hamlets
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Tower Hamlets
Tower Hamlets is about 26.2 miles east of our Slough base as the crow flies, with postcodes including E2, E14, E3 and E9. The nearest towns to it are Hackney (2.5 miles), Newham (3.2 miles), Southwark (3.5 miles) and Islington (3.6 miles).
More on floor grinding, part of our screeding services.