Grinding shop and office floors from Brixton to Waterloo
A grinder works like a very coarse sander for concrete. Diamond segments on a spinning head shave concrete or screed down a fraction at a time, so the operator can take down a ridge, flatten the lip where two pour bays meet or skim off a stubborn film without breaking anything out.
In a Brixton Market unit between tenants, or a South Bank venue being refurbished, the floor under the old finish rarely starts clean. Carpet tiles leave tackifier, vinyl leaves a hard adhesive bed, and earlier occupiers may have painted the concrete. Levelling compound, fresh adhesive and resin applied by others all need that layer gone, because each can only hold as well as whatever lies beneath it. Grinding removes it and opens the surface so primer can soak in.
New space has faults of its own. The Vauxhall and South Lambeth redevelopment zone is adding large volumes of commercial floor. Where new slabs are cast in bays, they can leave steps at the joints, trowel marks and a weak surface skin. A pass with the grinder takes them off before the fit out trades arrive.
What grinding cannot do is correct a floor that slopes or sags across a whole room. Taking the high side down far enough would cut too deep, and on a screed it could leave less than the minimum depth. For that, we grind the local high spots and bring the rest up with levelling compound for Lambeth floors or a new screed.
Dust control in Lambeth flats and estate blocks
Concrete, screed and tile all contain silica, and cutting them releases fine respirable crystalline silica dust that harms the lungs. We only grind with extraction connected directly to the machine, and we seal off neighbouring rooms, doors and vents before starting. In a borough where most people live in flats, with neighbours a floor or a wall away, that care is part of the job rather than an extra.
Homes built between 1973 and 1999 make up 12% of Lambeth's stock, and the borough's large council estates, Stockwell Park and Loughborough among them, mix 1940s low rise blocks and towers from the 1960s and 1970s. When flats like these are refurbished and old vinyl is lifted, the slab beneath can be coated in adhesive, and grinding is a tidy way to clear it before new coverings or compound.
Extensions are another case. Where a new extension slab meets the old floor there may be a lip along the join, and grinding the proud edge down allows both areas to be levelled as one.
For big open areas or thick coatings, shot blasting may be quicker; see shot blasting as part of floor preparation. Cracks and broken patches are dealt with under concrete floor repair.
How we price floor grinding in Lambeth
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Lambeth
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Lambeth
Lambeth is about 23.3 miles east-south-east of our Slough base as the crow flies, with postcodes including SW9, SE24, SW4 and SW8. The nearest towns to it are Southwark (2.1 miles), Wandsworth (2.9 miles), Lewisham (4.2 miles) and Westminster (4.3 miles).
More on floor grinding, part of our screeding services.
