Estate flats from Loughborough to Tulse Hill
Lambeth's large council estates mix 1940s low rise buildings with 1960s and 1970s towers. When those flats are refurbished, the concrete floors under old coverings are often sound but not flat enough for a modern finish. Any hollow or hump shows through thin vinyl or LVT, and big format tiles will lip at the edges unless the base under them is flat.
The measure is a 2m straightedge under BS 8204. Under that straightedge, an SR1 floor may show no gap over 3mm, while SR2 allows 5mm and SR3 10mm. Thin sheet flooring generally needs the SR1 standard. Poured at somewhere between about 2mm and 10mm, levelling compound pulls a floor back within those limits.
About 17% of the borough's homes were built between 1945 and 1972, a period that takes in the 1940s low rise blocks and the 1960s towers. Before any compound goes down, the floor has to be clean and sound, with old adhesive, paint and loose patches removed. Our floor preparation service covers that, including shot blasting where needed.
Then comes the primer, chosen for the base. A concrete slab, a hand-laid screed, an anhydrite screed and old tiles or boards all take their own primer, and a mismatched primer is a common cause of compound coming away.
Some floors are past levelling. Cracked, crumbling or hollow areas need screed repairs first, and a floor that is badly out needs a new screed rather than a deep pour of compound.
Shop refits in Brixton Village and Pop Brixton
Brixton Market, Brixton Village and Pop Brixton see frequent fit outs as tenants change. A new operator usually wants a fresh floor finish, and the base underneath often carries old adhesive, patched areas and changes of level where walls or counters once stood. Levelling compound turns that into a flat, even surface quickly, and fast drying products keep a tight opening date on track.
Further north, the South Bank cultural quarter at Waterloo sees regular refurbishment, and offices around Vauxhall and Nine Elms bring new floor space that may need levelling between trades. A shop or office floor often needs a harder wearing compound than a home, and the product is chosen for the traffic it will take.
The same principles apply at home. In an older Lambeth house that has been extended, the old and new floors frequently meet with a slight step or slope. Levelling compound can blend the two, as long as the difference is within its range.
When the gap is deeper than a compound can safely take, a new screed is the honest answer; our hand-laid sand and cement option covers that. We also cover levelling jobs in Westminster, about 4.3 miles away.
How we price floor levelling in Lambeth
A fixed written price within 24 hours, once we know the area and the base. See our floor screeding cost guide.
Who levels your floor in Lambeth
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Floor Levelling from Slough to Lambeth
Lambeth is about 23.3 miles east-south-east of our Slough base as the crow flies, with postcodes including SW9, SE24, SW4 and SW8. The nearest towns to it are Southwark (2.1 miles), Wandsworth (2.9 miles), Lewisham (4.2 miles) and Westminster (4.3 miles).
More on floor levelling, part of our screeding services. Not sure whether you need a thin compound or a full flowing screed? See self levelling screed explained.
