Sherwood, Ramslye and other floors that suit pumping
Give liquid screed a big, uninterrupted floor and it comes into its own. It arrives mixed, is pumped in through a hose, and finds its own level across the whole room. There is no screed rail to move every metre and no bay joints to line up, and it shrinks so little that far fewer joints are needed than in a sand and cement floor.
An extension on a Sherwood or Ramslye house, with the kitchen and dining room opened into one, is exactly that kind of floor. So is a new-build ground floor, and 9% of homes in Royal Tunbridge Wells were built from 2015 onwards. The finished surface reaches SR1 or SR2 flatness readily, which is what large tiles and click flooring need.
Two kinds of liquid mix are on offer. The calcium sulphate kind is common over heating pipes and in rooms that stay dry. Cement based products are the choice where the floor might get wet. Floating on insulation, a home's floor begins at roughly 35mm and a commercial one at 40mm, and in most cases the surface will bear someone walking on it after 24 to 48 hours.
Flats are a big part of the town's housing, and a liquid screed can be pumped to an upper floor where the route allows. Where the layout, finish or programme points elsewhere, our comparison of liquid and sand and cement screed sets out the choice.
Pumping to flats and houses in Royal Tunbridge Wells
Flats make up 37% of homes in Royal Tunbridge Wells, so upper-floor access is a real part of planning a pour. The pump stays in the street or car park and the hose climbs a stair, runs along a landing or comes in through a window. We need to know which floor, how the route runs and who manages the building.
Houses are simpler, but the truck still needs a place close to the door. Parking bays, narrow driveways and gardens reached through a side gate all affect where the hose goes. Flag any of those up when you first get in touch for a quote.
Once the screed is in, the room should be closed up for a day or two, then ventilated to help it dry. For a rough timetable, the first 40mm lose their moisture at something like a millimetre daily, and progress tails off after that. Our guide to screed drying times covers the detail.
If the new floor will carry wet underfloor heating, read the underfloor heating screed page for Royal Tunbridge Wells before fixing depths. The same pumped service runs in Tonbridge, about four miles away.
Liquid Screed prices in Royal Tunbridge Wells
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Royal Tunbridge Wells
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Royal Tunbridge Wells
As the crow flies, our yard in Slough is about 48 miles from Royal Tunbridge Wells, which lies to the east-south-east. Postcodes here include TN1, TN2 and TN4, and Tonbridge (4.1 miles), Crowborough (6.7 miles), Sevenoaks (10 miles) and East Grinstead (11.8 miles) are close by.
More on liquid screed, part of our screeding services.
