New phases at Ridgewood Farm and older Uckfield estates
On a development like Ridgewood Farm, flowing screed is laid plot by plot across a phase. One visit per ground floor is the norm, and because the material barely shrinks, bays can be large and joints few, which keeps the site programme on track. SR1 or SR2 flatness is well within reach, good news for the tiler or LVT fitter who follows.
The older estates bring a different kind of liquid screed job. Houses from the 1970s to 1990s tend to produce kitchen extensions and garage conversions, and a single open room at the back of the house is exactly where pumped screed pays off. There must be no step where the extension meets the house, and floating over insulation a liquid floor can be as thin as about 35mm against roughly 65mm for sand and cement. That saving in depth leaves more room for insulation under the new floor.
Flats make up 14% of homes in the town, and an upper-floor flat can take liquid screed too, provided the floor below is sealed, the structure is ready and the hose can reach the room.
Liquid screed covers two kinds of material: calcium sulphate, the usual choice in dry interiors, and cement based flowing screed for areas that may get wet. On a specified new build, the grade and finishing matter, and the anhydrite flow screed specification page covers that side.
Pumping and drying liquid screed in Uckfield
The pump does the hard work. The mixer parks on the road or drive and the screed is pumped through a hose to the room, round the side of a house, through a garage or up a stairwell. On a detached house or semi with side access this is simple. On a terraced street, the hose comes through the front door over protected floors, and the lorry needs a legal space close by for the pour. Our own team runs the screed pumping; we do not hire out pumps or machines.
With heating pipes below, it is the cover that fixes the depth: 25mm or more on top of them, so roughly 45 to 50mm overall. First switch-on is dealt with on our Uckfield heated floor screed page.
Drying is slower than walking time. The floor can be crossed at 24 to 48 hours, yet the water leaves at only about a millimetre a day for the first 40mm, slower after that, so the flooring waits until a moisture test passes. Plan the fitters' dates with our guide to screed drying times. Up the road, the Crowborough liquid floor screed page covers the same work.
Liquid Screed prices in Uckfield
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Uckfield
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Uckfield
As the crow flies, our yard in Slough is about 50.4 miles from Uckfield, which lies to the south-east. Postcodes here include TN22, and Crowborough (6.9 miles), Lewes (7.6 miles), Haywards Heath (8.8 miles) and Burgess Hill (10.1 miles) are close by.
More on liquid screed, part of our screeding services.
