Why Snodland rear extensions suit a pumped screed
Liquid screed is mixed off site or in a mobile mixer and pumped through a hose straight into the room. It spreads under its own weight, and a quick dapple with a bar releases trapped air and settles it level. There is no hand compaction and no screeding rails, so a whole extension and the kitchen it opens into can be poured in one visit.
That suits the rear extensions common on Snodland's late 20th century housing. The rooms are regular, the floors run wall to wall, and the owner usually wants tiles or LVT with a flat, crisp finish. Getting such a floor to SR1 or SR2, checked with a 2m straightedge, is straightforward with this material, and because it barely shrinks it needs far fewer joints than a screed laid by hand.
How thick it goes is decided by the layers below. Poured floating on insulation boards, it starts at roughly 35mm in a home and 40mm on commercial floors. Where heating pipes run through it, at least 25mm must cover them, giving a total of 45 to 50mm.
Two families of liquid screed are available. Calcium sulphate products are the usual choice in dry rooms, and there is a separate anhydrite flow screed page for Snodland covering grades, sanding and moisture tests. If the floor could get wet, the cement based kind is the one to pour. Either way, the product is chosen before the pour, not on the day.
Flats make up 16% of Snodland homes, and a flowing screed is often the practical way to finish an upper floor, because the hose carries the material where a wheelbarrow cannot go.
Getting the pump to a Snodland front door
A pumped pour depends on access outside the house as much as on the room itself. We have to park the mixer and pump close by, then take the hose to your door by a direct route.
Terraced houses are 36% of Snodland's homes. Where a terrace has no side passage, the hose usually runs through the front door and along a protected hallway to the extension at the back. We lay protection before the hose goes in, and the run is planned so it does not pass over new kitchens or finished floors.
Street parking matters too. If the road is narrow, has restrictions or has parked cars along both sides, tell us when you request a price. We can then plan where the pump will stand and whether the hose needs extra length. What turns up on your street, pump, mixer and hose, is shown on our screed pumping page.
A day or two later, somewhere between 24 and 48 hours, you can cross the floor on foot. Proper drying runs on a slower clock, around 40 days for the first 40mm and then slower still. Before you book the floor fitter, read our screed drying times guide. For the same service nearby, see liquid screed in Maidstone.
Liquid Screed prices in Snodland
Liquid screed: £24 to £31 per m² supplied and laid (MyJobQuote, August 2026), so £960 to £1,240 for 40 m². MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide or screed calculator.
Who lays your liquid screed in Snodland
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Liquid Screed from Slough to Snodland
As the crow flies, our yard in Slough is about 49 miles from Snodland, which lies to the east-south-east. Postcodes here include ME6, ME19 and ME20, and Rochester (4.9 miles), Maidstone (5.2 miles), Chatham (5.2 miles) and Gillingham (6.5 miles) are close by.
More on liquid screed, part of our screeding services.
