Which screed fits which Biggleswade home
Census 2021 recorded 21,945 people and 9,197 households in the Biggleswade built-up area. Semi-detached houses are the largest group, with terraces and detached homes behind them, and the building dates lean towards recent decades. That mix points to three broad kinds of floor job.
The first is new or nearly new. Around King's Reach, houses are the natural setting for wet heating in a flowing screed, whether it goes into the original build or into a later garden room or kitchen extension. Our page on underfloor heating screed in Biggleswade covers pipe cover and when the heating can go on, and pumped liquid screed explains how a large open floor is poured in one visit.
The second is older property. Listed buildings in the conservation area, the White Hart among them, need floor work agreed in advance, so the approach is settled before anything is broken out. Small rooms, tired old bases and wet areas in older houses tend to suit hand-laid sand and cement, which can be placed in awkward spaces and gives a cement substrate.
Third comes the solid floor whose only fault is that it dips too much for the covering going on top. That calls for self levelling compound rather than a fresh screed, provided the base is firm and the dips are shallow.
If your architect's drawing specifies a calcium sulphate grade, expect sanding and a separate moisture test before flooring; our anhydrite flow screed page goes through both. If you are unsure which of these describes your floor, send photos and the room sizes and we will say which route fits.
Homes in Biggleswade at a glance
Semi-detached houses make up 37% of the 9,197 households in Biggleswade, followed by terraced houses at 25%. The largest group of homes here was built between 1973 and 1999 (28%), and a further 22% since 2015.
| Homes in Biggleswade | Share |
|---|---|
| Detached houses | 24% |
| Semi-detached houses | 37% |
| Terraced houses | 25% |
| Flats | 13% |
| Built before 1919 | 8% |
| Built 1919 to 1944 | 6% |
| Built 1945 to 1972 | 20% |
| Built 1973 to 1999 | 28% |
| Built since 2000 | 38% |
House types from Census 2021 (table TS044); building age from the Valuation Office Agency council tax stock of properties, 31 March 2026 (table CTSOP 4.1). Figures cover the Biggleswade built-up area (E63003740).
Screeding services in Biggleswade
- Liquid ScreedNewer King's Reach homes and open-plan extensions suit pumped liquid screed. We pour it across Biggleswade, flat and walkable in 24 to 48 hours.
- Sand and Cement ScreedWet rooms, garage conversions and dug-out old floors in Biggleswade often call for hand-laid sand and cement screed.
- Underfloor Heating ScreedHeated kitchen extensions and garden rooms at King's Reach in Biggleswade need underfloor heating screed laid right over the pipes.
- Anhydrite & Flow ScreedNew plots east of King's Reach and Biggleswade flats may name a CA grade of anhydrite screed. We pour, sand, test and prime it, with drying advice in writing.
- Floor LevellingBefore LVT or large tiles go into a Biggleswade home or an A1 Retail Park unit, floor levelling with compound to SR1 or SR2.
- Latex ScreedOld quarry tiles, overboarded timber or patchy concrete under a Biggleswade kitchen or bathroom? Latex screed smooths it for vinyl.
- Concrete Floor GrindingDiamond grinding for Biggleswade slabs and screeds, from Stratton Business Park units to extension joins: ridges, paint and adhesive off.
We also offer fibre reinforced screed, quick drying screed, high strength screed, bonded screed, floor preparation, screed repairs, concrete floor repair, screed pumping, insulation & membranes, commercial screeding and residential screeding in Biggleswade.
Timing pours on Biggleswade builds and business parks
In a Biggleswade house build, the screed slots in after the builder has finished and before the flooring fitter turns up. By pour day the roof and windows should be closed in, the wet plaster work behind you and any heating loops pressure tested. Then comes drying, at about one day for each millimetre up to 40mm and longer past that, which is why the kitchen fit and tiling should be planned around the screed, not squeezed in before it is ready.
Access decides how a pumped screed is set up. Our pump and mixer have to park close enough for the hose to reach your door, so if parking is tight, the drive is shared or the route runs down a long garden, say so in your enquiry. For an address on the High Street, Hitchin Street or Shortmead Street, tell us where a pump could stand so its position is agreed before the day.
Commercial floors follow a different rhythm. Stratton Business Park and the A1 Retail Park hold a steady base of units, and Symmetry Park now includes a 661,000 square foot Co-op regional distribution centre, opened in May 2022. Floors like these rely on high strength screeds, repairs and grinding to stay flat for racking and forklifts, and the work is usually fitted around a tenant change or a planned shutdown. Our commercial screeding service covers that side, from a single trade unit upwards.
Screeding prices for Biggleswade floors
Sand and cement £18 to £25 per m², liquid £24 to £31 per m², supplied and laid (MyJobQuote, August 2026). MyJobQuote does not say whether these figures include VAT. See our floor screeding cost guide.
Who lays your floor screed in Biggleswade
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Reaching Biggleswade
On the map, Biggleswade sits north-north-east of Slough, about 41.7 miles from our base in a straight line (postcodes including SG18), next to Sandy (3.1 miles), Stotfold (5.1 miles), Baldock (7.4 miles) and Letchworth (7.7 miles).
See our screeding services for every screed type we lay.
