Preparing office slabs at Stockley Park and Uxbridge
When an office at Stockley Park is stripped back, the slab under the old carpet tiles may not be in the state the next fit-out needs. Tackifier and tile adhesive leave a sticky film. Paint marks the line of old partitions. Where bays of concrete were poured side by side, a small lip can stand proud at the joint, enough to rock a raised access pedestal or telegraph through a thin finish.
A floor grinder deals with all of that. Diamond segments on a rotating head take the top of the slab off a fraction at a time, so ridges and lips come down and coatings and residue go with them. The result is bare, clean concrete with an open surface that new adhesive, compound or screed can grip properly.
On Uxbridge Business Park, or at the offices in The Old Vinyl Factory in Hayes, the sequence would be the same: grind, vacuum, then the floor is ready for floor levelling compound in Hillingdon or for the flooring contractor directly. Where a client wants a resin finish, we grind the slab and hand it to the resin installer. Resin and polished concrete are outside our work.
For very large areas, or coatings too thick for grinding to clear in sensible time, shot blasting or scarifying can be the faster route, and our floor preparation service covers those. The aim is a sound surface that suits the next trade, and we will tell you which method gets there with the least disruption to a working site.
Everything runs with dust extraction connected, which matters in an occupied office building.
Extension joins and old glue in Hillingdon homes
At home, grinding usually solves smaller problems. A new rear extension on a 1930s semi leaves a fresh slab beside an old one, and the two rarely finish at the same height. Grinding down the higher edge takes away the step, and compound feathers the rest so the new floor runs through.
Lifting carpet or old vinyl often leaves a layer of black or yellow adhesive. Some old adhesive can stay under latex, but thick, soft or flaking glue has to come off, and grinding removes it cleanly. Anywhere from Hayes End to Ickenham, a garage being turned into a room can need floor paint or oil-marked concrete cut back before a new floor goes on.
Grinding has limits, and it is worth knowing them before you book it. It takes off bumps and coatings; it cannot flatten a floor that dips or slopes across a whole room. Those floors need grinding first and then levelling or a new screed. Grinding a screed too hard can also leave it below its minimum thickness, so depth is checked as we work.
Silica is the safety issue. Concrete, screed and tiles all contain it, and grinding without control produces fine dust that should not be breathed. We grind only with extraction, sheet doorways and protect the rooms next door.
How we price floor grinding in Hillingdon
A fixed written price within 24 hours, once we know the area and what has to come off. See our floor screeding cost guide.
Who grinds your concrete floor in Hillingdon
K & B Screeding’s own team, led by director Donatas Bardisevicius. Founded 2019, company 12298780.
See what customers say in our Google reviews and on our testimonials page.
Concrete Floor Grinding from Slough to Hillingdon
As the crow flies, our yard in Slough is about 8.4 miles from Hillingdon, which lies to the east. Postcodes here include UB8, UB3, HA5 and UB9, and Harrow (5.6 miles), Ealing (6.1 miles), Hounslow (6.4 miles) and Slough (6.6 miles) are close by.
More on floor grinding, part of our screeding services.